Z3M Shifter Trim in Grey is Back in Stock

[redlinealley]

ECS Tuning has the Grey Shifter Trim back in stock. I know some guys on here are making them from there 3D printer. But I wanted OEM part for a perfect fit. Just passing the info on


http://www.ecstuning.com/b-genuine-b...ey/51162491397

[BimmerBreaker]

Seen some new oe pieces have defects on facebook. Let us know how it looks when it arrives

[Harvey Mushman]

Still no black ones, it seems. I bought a different color one and just painted it. Posting pics soon.

[magnetchief]

Is itnpossible to get good results with painting?
I assume some kind of Krylon plastic paint.
Would be worried about it peeling off.


Sent from my iPhone using Tapatalk

[Harvey Mushman]

Is itnpossible to get good results with painting?
I assume some kind of Krylon plastic paint.
Would be worried about it peeling off.

Yes--I've done it with lots of older cars where almost every piece is NLA
No--use SEM paint, & make sure to use an adhesion promoter
Not if you do it right

[magnetchief]

Yes--I've done it with lots of older cars where almost every piece is NLA
No--use SEM paint, & make sure to use an adhesion promoter
Not if you do it right

Thanks


Sent from my iPhone using Tapatalk

[redlinealley]

Shipping isn't until February, but I will post pics.

[Venom13132]

Is itnpossible to get good results with painting?
I assume some kind of Krylon plastic paint.
Would be worried about it peeling off.


Sent from my iPhone using Tapatalk

I found some good paint that I did my whole dash and console with and had great results. I covered the wood grain in my Touareg with it also. I bought their cleaner, adhesion spray, color coat, and top coat in matte and satin. I ended up not using the top coat.

https://www.colorbondpaint.com/


Thread of some photos of after.
https://www.bimmerforums.com/forum/s...5#post29434345