I've come across this really nice matte textured hose included with supercharger kits, but I've never been able to find anyone in the US that sells it. I'm tired of gloss silicone or hose with print all over it. Aeroquip hose looks the part, but it has no flexibility to fit on anything other than the appropriate connectors. Sizing needs to range from 1/2" to 3" as shown below.
Capital Driving Club Car # 102
How to turbo your car:
Step one. Install ecu and learn to tune and or have it tuned.
Step two. Install injectors and retune.
Step three. Install turbo parts and bits. get it running with out leaks. DO NOT DRIVE IT. Idling should be ok
Step four. Retune car
Step five enjoy
You might be on to something. A search for rubber hoses brought up a selection of K&N hoses in larger diameters. Exactly what I was after. Now I just need a 3/4 ID and 1/2 ID to match.
https://www.knfilters.com/search/pro...spx?prod=08108
Here are the smaller diameters I'm after, just in the US...
http://www.performancesiliconehoses....ength-24-c.asp
Last edited by Braymond141; 12-12-2017 at 05:22 PM.
id bet its just air hose with abrasive resistant cover and fabric reinforced. nothing special keep googling
Capital Driving Club Car # 102
How to turbo your car:
Step one. Install ecu and learn to tune and or have it tuned.
Step two. Install injectors and retune.
Step three. Install turbo parts and bits. get it running with out leaks. DO NOT DRIVE IT. Idling should be ok
Step four. Retune car
Step five enjoy
btw you can typically remove the paint stencil from the silicone hoses
Capital Driving Club Car # 102
How to turbo your car:
Step one. Install ecu and learn to tune and or have it tuned.
Step two. Install injectors and retune.
Step three. Install turbo parts and bits. get it running with out leaks. DO NOT DRIVE IT. Idling should be ok
Step four. Retune car
Step five enjoy
Bookmarks