I've abandoned my plans for putting an S52 motor in my '95 M3 and am now focusing on S54. I had the valve cover from my S50 powder coated Ford Racing wrinkle blue (same color as the first stripe in the ///M logo, which you could call Bavarian blue). This valve cover will bolt to an M52/S52 motor but the wiring channels and coil studs are for OBD1 electronics as found on M50/S50 motors.
36248faf-304e-4980-97d8-fedba0ee0b1e.jpg
8ae83e8b-50c0-4549-ab41-e0ce4b3331c4.jpg
d1f8ce6d-bf98-4775-a44b-b395a450f797.jpg
The cover is made from magnesium alloy and has new rubber bushings installed for the plastic cover mounts. The M Power cover shown in the 3rd picture is not included but can be purchased separately.
Selling for $150 plus $25 shipping
Last edited by 91-e30-318is; 03-27-2018 at 09:18 PM. Reason: Price drop
'91 E30 318is - Dinan chip, K&N cone intake, GC coilovers/camber plates, Koni shocks, ST sway bars, Supersprint exhaust.
'95 E36 M3 - cosmos intake, 3.5" HFM, 24 lb. injectors, Vorshlag AST 5100 coilovers/camber plates, TMS sway bars, UUC exhaust.
Price drop bump
'91 E30 318is - Dinan chip, K&N cone intake, GC coilovers/camber plates, Koni shocks, ST sway bars, Supersprint exhaust.
'95 E36 M3 - cosmos intake, 3.5" HFM, 24 lb. injectors, Vorshlag AST 5100 coilovers/camber plates, TMS sway bars, UUC exhaust.
hey will the plastic cover fit on an S50? I have a 95 m3. If so ill take it! how much shipped to NJ 07950. Please dm me.
Bookmarks