how many nm to torque both drain and fill plugs?
35 nm for drain plug?
bolts 17 nm?
For drain and fill plugs, I just get them to ~25ftlb and call it good. As long as they thread in smoothly, I just get them good and snug which is about ~25lb. Make sure you use new crush washers (or file copper washers flat). Only do this for fill plugs. Head bolts, oil pan, stretch bolts, wheel bolts, etc., find the spec and use a torque wrench.
"Tighten it until the oil pan itself starts to twist, then 1/4 turn more" - Jiffy Lube training manual, probably
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
Moved from BMW General sub-forum.
04M3 TiAg 69k slick-top 3 pedal
99M3 Cosmos 61k S50B32 euro 6Spd
88M3 AW 43k miles Project FS
WTB: 3.5" Eurosport/Conforti CAI
What fluids are you using?? What trans does a 3.0L diesel use?
Bookmarks