Cantry Member
Because of the never ending evolution of my M3 I have amassed a pile of parts that I really ought to sell. Some are new, some are used and some could make your car go really fast...... 660 whp 629 wtq.
Steedspeed open T4 turbo manifold $750
Custom made heat blanket for the Steedspeed $80
GTX3582R turbo with open T4 0.82 $1250
GT(X)3582R divided T4 1.06 turbine housing (new) $350 shipped.
3.5" stainless steel down pipe with WG pipe $300
3.5” aluminum turbo inlet pipe and filter $200
Rallyroad turbo engine mount arm $125
M/S5x ARP 2000 headstuds $125
S52 cam trays $75
Aux fan $45
DM Motorsport pre turbo WI nozzle holder (blue) (new) $90
210mm $1000+ shipping
Turbosmart Hypergate 45 wastegate (black) (14 psi spring) less than 100 miles $325
AMS-500 EBC $350
S52 oil pan $100
e36 M3 front brakes $200
Ground control spherical rear shock mounts $175
Dove grey coupe door panels $400 for all four
All parts are OBO and I will give deals if you buy a bunch of stuff together.
Last edited by chikinhed; 05-24-2019 at 03:26 AM.
Member
Dang you beat me to the punch. After I get my garage heater hung and fired up I was going to clean out the garage. Hopefully your loot is gone so they will want mine
Sent from my SM-G950U1 using Tapatalk
Member
Pm'd you
Cantry Member
Bump. Prices are OBO and can be shipped from Washington 98281 or from Vancouver if you are in Canada.
'97 M3, Estoril blue, 2 dr, euro 6-spd, EFR 9180 divided T4 .92 IWG, RK tuning, CP 8.5:1 pistons, Eagle rods, Schrick cams, L19 11 mm ARP studs, O-ringed block, Supertech stainless/inconel valves, Supertech springs & Ti retainers, ported head, S54 oil pump/pan, 80 lb. injectors, OBD1 intake manifold, Steedspeed twin scroll T4, 3.5" SS exhaust, eBoost2 EBC, HFS-4 W/M injection, AEM Failsafe, Zeitronix data logger, Racelogic TC, OpenOBC w. ethanol %, Ireland Eng. engine mounts, UUC black tranny mounts w. enforcers, UUC twin disc feramic, ARC-8's, MCS 2-ways, Z3 rack, Rallyroad strut bar, X brace, Eibach sway bars, Ground Control LCAB bushings, Bimmerworld RTAB's, Powerflex subframe bushings, 210 4-clutch LSD, Stoptech BBK, titainium shims, steel braided lines, brake cooling ducts.
Member
I needs the rally road arm
Sent from my iPhone using Tapatalk
Member
This is much of a great turbo kit. Surprised it is still here. Just add inter cooler, piping, BOV and tune.
Member
Sent a Pm, interested in quite a few items!
Member
Not sure if my PMs are getting through, but I'm interested in the manifold, downpipe setup, headstuds and oil pan. Ready to buy today. My Facebook name is Kody Maus, email is xxbuzzkill77xx@gmail.com, you can contact me at either of those.
Member
PM sent.
Cantry Member
Sorry guys, I’m totally sick with a cold and feel like crap. I’ll get the info you need tonight or tomorrow.
Member
Uhhhh has anyone heard from this guy? Is he alright? Lol.
Member
Prob changed his mind
Sent from my iPhone using Tapatalk
Member
Hope not lol. At least close the post if that's the case
Boost Addict
BMW CCA Member
Oh I'm sure he'll be back. BF.C FI OG here
senior LOUNGE creator
Dang
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Member
His cold turned out to be a drug resistant strain of TB. Chinkinhed is currently quarantined and awaiting death.
RIP Bf.C OG
Member
Would like to see pictures of Down pope. Is it v band? And what size. Very interested
Sent from my iPhone using Tapatalk
Member
Ill take head studs and most likely the DP
Ring Master
If you still have that 210 lemee know.
Sent from my iPhone using Tapatalk
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
OG Member
bump, let me know about a few stuff, I pm'd you about a few things.
1997 BMW ///M3 - Estoril Sedan 5MT - M-Rain Interior (1 of 1)
2001 BMW ///M3 - Laguna Seca Blue 6MT
YouTube: (///Motorsport Throttle) https://www.youtube.com/channel/UCUM...pYSmibzy5YmUvQ
Posting Permissions
Reply With Quote
Bookmarks