We are working on a new 1350 to 6 Bolt adapter. I had a bunch made for Colby last year. I will be using a 1350 forged yoke. My goal is to price them at $199. If someone manages to break one we could always switch to a nice chromoly strange or moser piece, but they start getting a little pricey. I doubt any automatic guys will have issues considering what Das Boot has put the old piece through. The tremec guys have a higher chance of any driveline failure.
I have the adapter in hand. It looks $$$$$. But it definitely won't fit the stock flange. Someone on the BMW drag Facebook group mentioned he has the same 1350 adapter. He just grabbed a 6 bolt flange from a e34 210mm which is larger than the e36 6 bolt flange. So now I'm on the hunt.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
Update. E34/E38 and some other 210mm diffs run a larger CV flange that the sonnax adapter fits. I've purchased one and waiting for it to arrive and I'll verify it'll bolt up to my diff in the e36.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
For anyone going to a one piece drive shaft. Sonnax 6 bolt to 1350 adapter and a e38 210mm diff flange. I'm not sure if they make any larger flanges for the 188mm or not.
20180228_181758.jpg
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
What's up Perry, what's up everybody. I'm hardly on here any more. I have tons of rear 6 bolt to 1350 U joint adapters in stock. They are built to take serious abuse, and built to last, and best of all they bolt in no modifications needed. Email me at Ride4life1500@gmail.com or call me at 267-980-0187
Support small buisness!
Billet aluminum versus a slip yoke welded onto a flange.. I'm going with the billet! Also cost less.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Follow my builds on youtube and IG.
www.youtube.com/thenameskam
@thenameskam on IG
Do you have anymore of these kits available
- - - Updated - - -
Do you have anymore of these kits available
Yes I have a whole bunch of them. I’ve been putting off advertising them till my car is done. I also have someone that bought one from me and decided to LS swap instead so he is looking to sell his kit.
hows best to contact you mate to arrange one please
Hi man, how to contact you ?
I need some help with
Bookmarks