My sunroof will not close or open. I have attempted the roof "reset", and while pushing the sunroof button in 'vent' mode, the motor started a process about 25 seconds in, but then would not stop at 2min. I released the button. Now I can hear the motor when pushing up, or forward, but not back to 'open' the roof. All the while, the roof does not move.
I opened the light panel to access the motor... manually attempting to close with the allen wrench tool did not move the roof, either. Any ideas?
Thank you for viewing... all 86 of you so far. Any fix suggestions or assistance would be greatly appreciated. Thank you.
There are multiple variants of the reset/learning functions. Have you tried all of them?
You might also consider disconnecting the battery for 30 minutes then giving it another shot.
Did this error occur randomly, or after altering the programming?
If randomly, you might want to check the track for debris (or lubricate the track if you use it often). Sorry if that's obvious, but sometimes the the culprit is as banal as a small acorn wedged in a weird place.
Sent from my SM-N920I using Tapatalk
Bookmarks