was wondering if anyone know if the B12 Pro-Kit Suspension System
fits a 99 e36 323is?
Yes that could be a figment, I say could because the set I looked at on the ECS Tuning website indicated 1995M3 and 1996M-1999M3 fitment.
The 318/325/323/328 use the same diameter spring ‘hat’ as the 1995M3. The 1996+M3 has a slightly smaller diameter upper spring diameter and ‘hat’.
Worst case is that you need to purchase the 1996+M3 spring ‘hat’ and upper spring pad.
I would recommend the E46M3/convertible Rear Shock Mounts and the Z3 Rear Shock Mount Reinforcement Plates.
Additionally, the 1996+M3 Strut Tower Reinforcement Plates.
There is an E36 323/325/328 Bilstein B12 Pro Kit # 46-180957
https://www.turnermotorsport.com/p-2...nsion-package/
I still recommend the RSMs and Reinforcement Plates mentioned previously. Also order and install the appropriate paper body gaskets.
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 11-01-2017 at 10:40 AM.
Thanks for all this info and yeah I know the have a set for the 323 but I got a set for the m3 for 200$ and that’s why I was asking if they would fit
Are you familiar with www.realoem.com?
Do you know what Model Year these were on previously?
You can see the part build-up in these types of images (from realism.com), this is for a 1999 M3 (really, 1996-1999)
http://www.realoem.com/bmw/enUS/show...diagId=31_1250
You should run the M3 spring “hats”, this is the same image for the 1995M3 (same spring “hat” diameter as 318/323/325/328)
http://www.realoem.com/bmw/enUS/show...diagId=31_1250
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 11-03-2017 at 03:19 PM.
They came off a 1997 m3 I did try them on after the I purchase them. but I’m off about 4 to 5 in for them to bolt on
Bookmarks