Not sure if there is another thread on this, but the audio guys installed my flip out Pioneer radio and now the heated seats don't work. Is there a fuse that I need to replace? Such a bummer! It was 19 degrees this morning and it would have been so nice to have those on.
I press the heated seat button, all three lights flash for a split second, then they turn off. This is for both the driver and passenger side.
Last edited by noahwinco; 10-27-2017 at 01:35 PM.
Hello - take a look at the link below to an earlier thread where the wiring diagram for the stereo is referenced. It may help you figure out where the fuse is.
https://www.bimmerforums.com/forum/s...wiring-diagram
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
BMW Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
I checked the fuses and all of them are fine. I can't figure it out!
Thanks for your reply, Pelican! If anyone has any idea, let me know. That was a big draw for me (the heated seats) and now they don't work
I would take it back and have them take alook
Ask installer if he spliced into any other circuit besides the radio power circuit,
I suspect he spliced into the seat heater circuit as an additional power source.
I would return and expect a proper installation, as you've already paid for it.
Last edited by MIKYZZ4; 10-29-2017 at 12:52 AM.
Perfect, will do. Thanks. Bought the car in CA so ill have to have it checked out here in CO
Do lights next to the button come on when you press it or not at all?
Does the radio really support to connect the heated seats? You'd better ask the customer service for help.
Have a diagnostic scan done to narrow down the possibilities,
but you can also check underseat connections by pushing in connectors.
Be careful and don't pull/push them out-then-in, as that can cause errors and airbag malfunctions.
Mless5, all three lights flash for a quarter second, then shut off
Bookmarks