Hello. The plastic FTP light housings in the bumper of my car were so brittle that the screws couldn't be used, so the previous owner glued them to the bumper.
I've removed the old FTP housings and got new ones.
However I can't find the part number on realoem for the correct screws and backing nut/clip to hold the housing. I can hold them fine with two M5 nuts and bolts each, but I'd rather do it the OEM way if I can.
Does anyone know the part numbers I should use?
IIRC, it should be as follows (this is at least what I used):
4 x 07129904144
4 x 07119904176
Someone feel free to correct me.
Last edited by toomanyparts; 10-25-2017 at 03:00 AM.
What "thumbs up" really means
Bookmarks