I can't seem to find my copy of Siemens-MS41-Flash-Tool on my back up hard drive and the site is down. I think I heard the creator died and his family took down the server.
Does anybody have a copy of the software they can send me?
If someone could do this i would also need a copy i cant find any other program to flash my ecu with
Galletto 1260 program with a basic KKL or K+DCAN cable will flash it fine.
You'd have to correct checksums with something else.
MPPS v13 clone interface works well on MS41. Super cheap too.
Free checksum correction: http://www.bmweditor.com/Home/Check
Last edited by 328 Power 04; 09-28-2017 at 08:22 PM.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
i tried the galletto 1260 already but it kept telling me connection impossible or something like that
havent tried mpps v13 tho was really hoping to get ahold of somebody i could get chipsters one because i heard its good
You need to use MProg program to read your USB cable's serial number (Read and Parse), then use a hex editor on the “EOBD1260.exe” file browse to offset 0x249E90 or search for text string “marca”.
There is an 8 character serial number written after 'marca', something like A8UDVPWH...
Get your cable's serial number and type it instead of that serial. Save file and it will work.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Abel, I hear (read) talk that some of the RomRaider guys are working on supplying the MS41 Flash Tool again. Do you know anything about it yet?
Kim's passing hit us all by surprise.
I know there was initial talk about doing something with his work in a best manner to benefit his family or his memory. It's still being figured out.
Until then, it's not fair to release all his genius hard work from an alternate source besides the original hard working developers of the MS41 definitions. I hope others can see it this way too.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Me too, I think it would be hard to see it any other way!
I have a copy which i am
Not sure if it is against rules here to pass on
Initially i used gellato cable, bridged pin 14 and 18 , used romraider and changed rpm to 7k
- - - Updated - - -
If not againt rules, i can post a download link here
Hey Drifter,
Could you PM me that link aswell? I havent had any luck using a different program/tool.
Much appreciated!
What are you needing Kim's flasher for? I have ways to flash your ECU over the internet, if you have a D-CAN cable and I assume that you do.
are you offering this service to members for free is the question?
Buy my native installed ISIS ISTA-D/ISTA-P bmw diagnostic laptop. More Info Here!
Would any one have Chipsters Siemens_MS41_binary_tool https://www.youtube.com/watch?v=ZDxzT0K1LuE
The software in that video is pretty interesting. I haven't seen that one before.. Maybe 328 Power 04 knows something about it?
I don't have it; didn't have a real need since you can get all that info out of the hexdump with a simple hex editor.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Yeah, I just took a better look at the video. It doesn't really seem to do anything super great, but I guess if all you wanted to do was raise your rev limiter it would be handy... We're not all hex ninjas like you!
All I wanted it for just to see what is that Rev limiter set it on the File
Dont we think sharing a paid for software of a deceased guy is a little wrong..?
Sent from my iPhone using Tapatalk
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
That was my initial inclination too. I happily paid the very reasonable price for Kim's excellent software when he was alive, and if his family wanted to keep his website going I would happily continue to pay them for what I needed from there. His family should be able to continue to profit from his work if they want to.
HOWEVER, they don't want to continue selling his software. At that point I see no problem with sharing his software and continuing to appreciate his contribution to the community. No one is being harmed, and his legacy lives on. It's what I would want if I were him. But I'm old, and might have pondered morose things like this more than you young guys. Lol
Well maybe its because knew kim and what went down... regardless his friends are working to get everything back running.. time will tell..
Sent from my iPhone using Tapatalk
1989 535i - sold
1999 M3 Tiag/Dove - sold
1998 M3 Turbo Arctic/black - current
2004 Built motor TiAg/Black - Sold
2008 E61 19T Turbo-Wagon - current
2011 E82 135i - S85 Swap - current
1998 M3 Cosmos S54 swapped Sedan - current
1998 Turbo: PTE6870 | 1.15 ar | Hp Cover, Custom Divided T4 bottom-mount, 3.5" SS exhaust, Dual Turbosmart Compgates, Turbosmart Raceport BOV, 3.5" Treadstone Intercooler, 3.5" Vibrant resonator and muffler, Arp 2k Headstuds | Arp 2k Main studs | 87mm Je pistons | Eagle rods | 9.2:1 static compression, Ces 87mm cutring, Custom solid rear subframe bushings, Akg 85d diff bushings, 4 clutch 3.15 diff, , Poly engine mounts, UUC trans mounts W/ enforcers, 22RPD OBD2 Stock ECU id1700 E85 tune, 22RPD Big power Transmission swap w/ GS6-53
I have suggested to one guy that he goes with the new MS41 flasher busterhax just released, but it's because that seems likely to be supported into the future. But a far as some of Kim's other software like this thread was about, it seems unlikely that anyone else is going to recreate it.
Bookmarks