Hello,
I bought one of these http://openlabs.co/store/Tiny-ADS-In...-pin-connector with the understanding that it would work to scan my 1995 E36 325is since I needed a cable that can read the L-line (pin 15) on the 20pin connector under my hood.
Ive tried using it with the "Mike's Easy BMW Tools Package" and it just wont work. I went in and changed the interface to ADS but still nothing.
I have the PA Soft 1.4 software and that tool but it only reads a few things. I thought getting this new connector from openlabs would allow me to read the DME and transmission computer plus a whole lot of other things.
Any idea as to what I should do? Has anyone bought the connector I linked above and has had success with older non-OBDII bmws?
As always, thank you all for the input.
Not sure how Mikes package is set up, but it sounds like a newer pack... TinyADS only works with the older EDIABAS (v6.4.3 or 6.4.7) on 32-bit windows (x86), and on a true serial port.
Also, Dell laptops need a special ADS driver.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
David MC posted it here. https://www.bimmerforums.com/forum/s...3#post29760473
But that file gets replaced into ediabas 6.4.3 - 6.4.7 .
7.0.0 - 7.3.0 will not work.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
You can just copy the ediabas 6.7.3 files replacing your newer EDIABAS, instead of having to do a full install. The whole EDIABAS folder.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Got the ADS connector working with EDIABAS 6.7.3, the only thing I cannot get to scan is the transmission computer. Any ideas as to why it wont connect to that?
Bookmarks