Results 1 to 1 of 1

Thread: F/S 1984 Burgundrot 633 CSi

  1. #1
    Join Date
    Dec 2006
    Location
    Trinity, florida
    Posts
    282
    My Cars
    1984 633Csi,1988 535IS, 2000MRdastr,1973 914 Porsc

    F/S 1984 Burgundrot 633 CSi

    I have continually tried to upgraded this car over my 13 yrs. of ownership. The car has a Burgundy Exterior. Interior was redone with pearl outside trim and a lighter burgundy colored Italian leather inserts front and rear. There is a tear in the rear seat caused by the person who replaced the window motor. Replaced old comfort seats with completely rebuilt sport seats. Car runs and shifts great. No shimmies.
    · Car is a 4 speed automatic.
    · Mileage is 157,000
    · Added front and rear spoilers.
    · Brake system was redone . Zimmerman Cross drilled rotors and Pagid brake pads were installed on all four corners. All four calibers were rebuilt and all brake lines were replaced with OEM lines.
    · A/C Compressor presently non-operational. Car is converted to R 134.
    · Wheels are restored 3 piece BBS RS wheels. Restoration done by Paul Erlich of NC. No scratches or curb rash. Someone stole one of the center caps. It was replaced but color of “waffle” center is about 2 shades off.
    · Valve cover and gasket were replaced. Valve cover is a custom crinkle with BMW logo replacement.
    · Car has received regular oil changes. Mostly done by me.
    · Complete tune up service (plugs, wires, coil, distributor etc.) was preformed about 1,500 miles ago.
    · Electrics windows, seats, sunroof, radio and CD all work (driver side rear window works but makes noise)
    · Car was completely painted by P/O but my painter has painted and blended some spots where clear coat was wearing. The roof has peeling clear coat that would now need to be addressed.
    · Bumpers (front and rear) were “lipoed” and then painted black. Most of the rear bumper rubber was replaced and trimmed to fit “lipoed” bumpers.
    · Front end was rebuilt new idler arms, all bushings, control arms, shocks etc. were replaced.
    · Passenger door seal and trunk seal were both replaced.
    · Fuel lines and power steering lines were replaced.
    · Power steering pump was replaced
    · New battery was installed in June of 2014.
    · Oil pan gasket was replaced 4/14
    · Engine mounts replaced 4/14
    · Camshaft seal was replaced 4/14
    · Fuel filter was replaced
    · Alternator was rebuilt 6/13
    · Front lower trust arm bushings replaced
    · Headlights replaced using H1
    · Dash cover installed
    · Cruise control is inoperable. Needs “pin” test
    · Tear in headliner by sunroof.
    · After 10 yrs. dash cover has warped by windshield vents.
    This car can be driven anywhere. With a little cosmetic TLC this could be a fantastic looking driver.

    Price $7,250.
    Attached Images Attached Images
    Last edited by Zieg; 09-24-2017 at 04:10 PM.

Similar Threads

  1. Replies: 0
    Last Post: 01-16-2014, 12:16 PM
  2. 1984 BMW 633 CSi Starts and runs - No Longer Available
    By tanyacharbury in forum BMW Cars For Sale / Wanted
    Replies: 0
    Last Post: 07-26-2013, 01:40 PM
  3. 1984 bmw 633 csi -- parting out --
    By smiley8011 in forum 1976 - 1989 (E24)
    Replies: 126
    Last Post: 11-08-2011, 11:54 AM
  4. 1984 bmw 633 csi -- parting out --
    By smiley8011 in forum Whole Parts Cars
    Replies: 0
    Last Post: 08-19-2010, 03:00 PM
  5. 633 CSI 1984 for Sale Daily Driver w/ AC
    By Markaren in forum BMW Cars For Sale / Wanted
    Replies: 0
    Last Post: 07-17-2007, 07:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •