I need to figure out the best way to add a secondary tether to a suction cup phone mount placed on the windshield. There are organizations out there like COM that don't require a tether, but most organizations do not consider a suction cup mount enough on it's own. The problem is there doesn't seem to be anything in the immediate vicinity that I can use as an anchoring point.
Anyone ever run into the same problem?
I use a GoPro suction cup. I mount it up high and just run a couple of tie wraps to the rear view mirror.
'95 M3 S54 Track Toy
'19 X5 40i M-Sport
'16 Cayman GT4
‘23 GR Corolla
Have you ever received pushback for using the mirror mount as an anchor location? I thought about that but figured it was unlikely to stand up in court.
What about something like this? https://www.amazon.com/GoPro-ATBKT-0.../dp/B007WSNXY8
Pretty small, and can be removed with a little GooGone or similar.
1993 E36 325is
2003 E46 325iT
SpeedHunters feature: http://www.speedhunters.com/2018/04/...t-dtm-tribute/
APEX feature: https://www.apexraceparts.com/blog/m...-arc-8-wheels/
I use a steel cable and tether to the ac vent. If Photobucket were still working I'd upload screenshot but you can see my ram mount tucked in the lower right corner.
Bookmarks