WTB PDC on e31

[Nigrechok]

Find any parts or full set pdc for my e31. please pm me if ypu have anythink

[6speeder]

are you sure... have you seen what the oem setup looks like? its was only available for the rear bumper, had 4 sensors, they are at different heights and the 2 central sensors are different and larger than the 2 outside sensors. they look bulky and very dated compared to todays sleek sensors. maybe retrofit a modern aftermarket set that you can also get for the front too and it would be much cheaper

[Nigrechok]

Yes I'm sure. I'm want oem setup...

[xeler8]

http://www.ebay.com/itm/BMW-E36-E31-...9X0SSB&vxp=mtr

[Nigrechok]

Thank you!
Still find full set pcd...

[dancerst]

I am going to install front+rear PDC from e38.
It will look much cleaner than OEM. The most rare thing to find though it's an OEM E31 PDC switch.

[affa]

I am going to install front+rear PDC from e38.
It will look much cleaner than OEM. The most rare thing to find though it's an OEM E31 PDC switch.

I believe it's still available. I got one last year or the year before...

Are you using the 2 wire or the 3 wire active system?
I know the 2 wire system works but would be nice to confirm the active version works.

[dancerst]

I believe it's still available. I got one last year or the year before... Are you using the 2 wire or the 3 wire active system? I know the 2 wire system works but would be nice to confirm the active version works.

I will use 3 wire system

[Nigrechok]

I am going to install front+rear PDC from e38.
It will look much cleaner than OEM. The most rare thing to find though it's an OEM E31 PDC switch.

What is a switch? PCD on e31 turn on automatically

[dancerst]

What is a switch? PCD on e31 turn on automatically

Yes it does, but switch is still part of the system.

[Nigrechok]

I saw many cars with OEM pcd System. And none of them don't have this switch. In oem new set of pcd this Switch is also absent...

[toomanyparts]

PDC Switch. No affiliation:

http://www.ebay.com/itm/332393528604?ul_noapp=true

[NOJSER]

Are you still looking for pdc?

[dancerst]

I will be making PDC kits for e31/36/34
pm if interested

[CaifanSC]

are you using factory bmw sensors? If so, from which years? I was looking into making the e38 system fit but ran into the BUS issue, then I just left the project by the wayside.