Hi All,
I am planning to replace all my injectors in my 750Li xDrive 2013 as it has throw a "drive train malfunction" and cylinder 5 injector problem.
There is a need for 2 things:
1- A DIY for this procedure
2- An INDY K+DCAN software and connector to update the injector codes in the computer
Does any one by any chance know of a post or can help me in this process?
I am also in the DFW area in Texas.
Thank you,
This is not a DIY job.
This gentleman has done it himself on his 3 series. My injectors are exactly the same, so I guess I should be able to DIY, if not at least worth the try.
http://www.e90post.com/forums/showth...=fuel+injector
BMW stealer wants $1,200 to replace just one injector on cylinder 5 and about $5,000 to replace all eight of them.
The injector replacement in an E90 and a F01 are completely and totally different. They use the same style injectors ( piezo ) but that's about it. It's not a DIY job seriously. If you insist on royally ruining your car then go for it. It's only nuts and bolts right?? Piece of cake...
Bookmarks