Clicking sound after replacing coilovers

[dajson]

I replaced old coilovers with new ones and now there is a clicking sound when I turn. They are a different brand but I did not change anything. The only thing I noticed is the top sway bar end link on the left is higher than the right where it connects to the coilover. I connected them at the same height as on the old coilovers. Could this be the problem? I don't understand why the heights changed. I had the car jacked up evenly. There was no clicking with the old coilovers. Thanks in advance for any replies.

[bluptgm3]

What are you running?

It does sound like something is loose.…


Sent from my iPhone using Tapatalk

[E46M3Dakar]

First I would double check to make sure everything is torqued down correctly. Second, if I am understanding correctly one sides swaybar is resting higher then the other? If so, or if everything is torqued and you are still having the issue, then I would reinstall the swaybar end links while having the wheels preloaded if you did not do this originally.