I have a 95' M3, just ordered some stuff to refresh the motor.
I got new spark plugs ( https://www.ecstuning.com/b-bosch-pa...plus--slash-6/ ) and was wondering if anyone could explain to me the "prongs" & if these are the same prong as stock, if there's anything I need to do to run these from the stock ones, what they should be gapped to and if anyone has had them and has a quick review on them! Thank you!
To the best of my knowledge the 1995M3 'likes' NGK sparkplugs (and Bremi coils)
Your plugs look very similar to the non adjustable twin electrode NGKs -
https://www.ecstuning.com/b-ngk-part...r6ek/bkr6ek-6/
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 08-21-2017 at 10:14 PM.
Well I ordered a kit with the coils and plugs so there was not changing it around, would really like to know about the "prongs" what's the difference from stock, and what do I need to gap them to or if they're pregapped.
They are pre gapped, and that style of plug cannot be gapped by the user.
As to the prongs, its just a spark plug, there have been many design over the years and these are no more efficient than the typical single prong that most cars use.
Attn. NEWBIES: Use the search feature, 98% has already been discussed.
Click the search button, select "search single content type", select the "e36 sub forum" specifically, try the "search titles" then try the "search entire posts".
Bookmarks