Making a thread here since we decided to try and go full Racemode
Here is the old build thread: https://www.bimmerforums.com/forum/s...ead*With-Vids*
Some info:
Motorsport Hardware X Motorsport Fluids race car build
7.1L 434ci ERL built Motor w/AFR Built top end 660hp/600tq
AST 5100 suspension in place before Moton 2 way are ready
T56 - 6 speed
Partners is build:
Motorsport Hardware
Motorsport Fluids
JMP Autowerkz
Marvelous Tune
Moton/AST Suspension North America
Swift Springs
Maxxis Tires
Sparta Evolution Brakes
Hard Motorsports
Here are current pics as of 8/15/17
Been a while.....and a few changes...Racemode
Pics from this past weekend's shakedown
damn this is hot, perfect E36 <3
Dry sump?
Subscribe!
Hi kalib0Y,
I came across an old thread where I think you state that you once had BC racing coilovers? Was just wondering how you liked those? I am in need of a new suspension for my e36 race car and considering one of the higher end BC racing coilover kits or the TCK koni based double adjustables. Do the BC racings even compare to the Motons you run now?
Hi, I am buying AST5100 series suspension for my Z3 coupe and the front end is similar to E36. What specs wheels and tires are you running on front and how close to wheel and tyre are the shocks?
I have 8,5X18" ET35 wheel and 225/40 tyre and on our calculations it would come very close so that even AST's head of products was not sure. So your answer is very valuable, thanks in advance!
Last edited by Remotion; 10-11-2017 at 08:23 AM.
Z3 & E36 RamAir systems, send private message for more information.
Night and day difference. The AST/Moton feel "controlled" over the "stiff" feeling of the BC that try to keep up with track abuse. Even the AST 5100 were a great upgrade, We will be testing this weekend on the Moton 2-ways so we look forward to gathering data about those. I would say the AST 5100 are similar to KW club sports
I am running a large amount of camber so we have shims in my front suspension that skew what others can run. I would say if you are not using any shim kits, your fitment will work no problem in my opinion
Thank you very much!
Z3 & E36 RamAir systems, send private message for more information.
Dave
'18 RAM 2500 Laramie Cummins
'15 Pure White VW Touareg TDI
///'95 Avus M3 S54B32 Race car -- 2022 ProAutoSports PS1 Champion
///'72 Chamonix 2002 (Restoration project)
From this past weekend's Continental Odd swap challenge and Super Street Super Lap Battle
Thoughts on the Motons? Are you running a true coilover rear?
How'd the car do? Love this car!
Dave
'18 RAM 2500 Laramie Cummins
'15 Pure White VW Touareg TDI
///'95 Avus M3 S54B32 Race car -- 2022 ProAutoSports PS1 Champion
///'72 Chamonix 2002 (Restoration project)
The are perfect. No complaints from them at all. We get all the adjustment we need and they feel great
The car did well! for only being a street car 5 months ago, we know what we need to do to get closer to winning next year. We were 3 seconds off...thats how close the competition is...but we were basically drifting the course haha!
More pics
Looks good! AND FAST!
Z3 & E36 RamAir systems, send private message for more information.
Inspirational. Really. I need to know some specs. lol No pusher fan? Is it ok to run without with a upgraded radiator and SPAL? And what size rubber you running, looks like a lot.
Some more recent pics at the end of 2017 at super lap battle. Came in 7th because the thermostat housing coming loose and working out some other small issues. Best lab at BW is 1.51.7
Despite the R compounds, Lack of tire was our achille's heel. So we start the beginning of 2018 with more wide. 18x10.5 w/295 front and 18x12 w/315 rear
Lets see how we do in 2018!
Last edited by kalib0y; 03-20-2018 at 01:09 PM.
Flares on flares
Did a photo shoot with a buddy this past weekend.
And in her Race dress. Ready for the weekend at the track!
Love this setup!!! Are those Canards custom made? I've been looking for a good set
1996 328i (m52B28US) OBD1 euro ZF 5spd. 3.23LSD conversion / Chem. PnP Head/ DINAN stg.2 CHIP/ VAC race valves/ S52 cams/ A/C delete/ fan delete/ Washer Fluid resv delete/ ARP head studs/ Cometic 140MLS / VAC Solid Engine/trans Mounts/ CAI / 2.5"Borla race exahaust/ NGK R spark plugs, M50 Mani, S50 Oil Res, Riot Racing HFTB, SAMCO Hoses, JBR FW, X-Brace, Mtech Front Bumper, RE RSMs, stoptech SS lines, Bilstein sports, H&R Race Springs, S52 Reinforcement plates, Kosei K1 w/ bridgestone RE960as, Brembo/stoptech slotted rotors, M3 Trailing arms, M3 Calipers, M3 Axles, ACS strut brace, weight reduction.
http://mbuild.blogspot.com/
Bookmarks