Blown what...?
1995 BMW M3 Turbo
1995 Turbo M3, 124k chasis miles, aprox 500 miles on brand new built engine. Bought the car back in 2012 from the original owner, all records from day one including every single oil change. Complete stage 3 turbo with (methanol injection) pushing at least 600rwhp 550rwtq . Everything has been replaced, from suspension to every little sensor, all brand new. Too many mods to list, pics should show its beauty
Some upgrades
1-SteedSpeed Twin-scroll manifold
2- Wiseco Pistons 8.8:1 CR
3- K1 Rods, Blueprinted and Balanced
4- ARP Main Studs
5- O-ring block
6- GTR 12mm head studs
7- GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing
8- TRM custom tuning
9- 6 Speed Transmission
10- UUC Twin Disc Clutch
11- UUC EVO III
12- UUC DSSR 109mm
13- EVO 6 Speed Driveshaft
14- HFS-6 W/M injection
15- Zeitronix data logger
16- 3" SS full exhaust
17- Rallyroad strut bar
18- X brace
19- Race coilovers.
20- New Michelin Pilot Super Sports
21- LTW wheels
22- Luxury door panels
23- Schrik Camshafts
Asking price 20k
List Date: 8/7/2017
For more info, click here to view the original listing: 1995 BMW M3 Turbo
--------------------------------------
This item is no longer available.
--------------------------------------
Last edited by Matutino; 09-06-2017 at 02:32 PM.
senior LOUNGE creator
I'll take the Walkie talkie
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Blown what...?
Wire 20gs and is yoursOriginally Posted by GG///M3
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
senior LOUNGE creator
For 20g's I can build something far better. A Plutonian skateboardWire 20gs and is yours
Sent from my iPhone using Tapatalk
Last edited by GG///M3; 08-07-2017 at 11:31 PM.
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Blown what...?
Good then stay out of my thread and use the time wisely to build your whatever that is
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
senior LOUNGE creator
The Plutonian skateboard is worth more then every BMW ever created.Good then stay out of my thread and use the time wisely to build your whatever that is
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Member
Beautiful car! Are there any imperfections on it?
WTB: 94 325is M-Technic
-----> Pm me if you have or know of one. <-----
Blown what...?
Thank you.
The hood has a small dent, size of a quarter but nothing you will see unless I point it out.
Last edited by Matutino; 08-08-2017 at 10:03 AM.
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
Member
GLWS. That is one hell of a deal. I hope you end up keeping it. Your gonna miss it!
-sold...replaced by turbo e36
Blown what...?
Sold.
Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.
senior LOUNGE creator
That was quick
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Member
Who picked it up? Forum member?
This is my signature....
Member
...I'da gave him 20k just for the binder!!
Don
Member
Does that mean you, Don. Didn't you build the motor too?
This is my signature....
Posting Permissions
Reply With Quote
Bookmarks