Hello everyone.
I'm having some issues with my diagnostic software.... All the help I can get is much appreciated.
Note: used bcables 1-click innstaler. And a cable from them.
Car: E39 sedan 1999.
Using a 16-pin to 20-pin adapter as well.
INPA issue:
Works like a charm.. For reading codes and so on.. But I get this when I try to get into Air Condition... Anyone knows how to fix this?
inpalang.png
DIS:
I'm having some connection issues here.... I've tried allot of different things.. Been trying to google.. But no results yet..
I've got a cable from bcables.com supports INPA K-can and dcan and all that..
I'm running DIS through VMware Player. I don't know if that might be my issue... Some weird connection issue through there.. But I'm not sure.. I've tried to change com ports..
Add the com port in the VMware player settings etc.. No luck yet..
It's the same with SSS/Progman.
impaired.png
Thanks in advance... I'm getting a bit mad at this.. But any help would be nice.
And please watch the video, thanks!
Also a video:
Bookmarks