So I've looked and looked and realized there's a million different ways to do an e36 suspension but I'm looking for a trackable yet street car from bushings to shocks and struts Down to little things like control arms, sway bars etc I've hear that condors solid suspension kit is worth the buck and comfort is something I'm willing to sacrifice for handling however I would love to keep some comfort if at all possible I want to track this car when it's ready not drag strip not looking for a low time just to have fun and enjoy the car not looking for stock anything I want the best possible upgrades for my car biggest bang for my buck is the best option I do plan to turbo etc I know reinforcement plates for rear trailing arms, shock and struts as well those are on the list i know coilovers but after that it's hard to decide cuz there's a lot of options and not really one soild answer just don't want to waste my money on things that will not be worth it in the long run as well as put some upgrade that will cancel or interfere with other mods I do drive it agressivly I've bought m parrallels and am putting Bridgestone potenza re71 on them as well as turbocharging the car in the near future just want to upgrade on the little things before hand to get my car ready for the big upgrades any and all suggestions are welcome everything will be considered and compared. I own and 1997 328i convertible m52b28 however I did pull this engine from a 328i sedan so I don't know if it's any different or the same feels stronger than the old motor but could be my imagination did drive a 4 cylinder for about a year before I could get it running again. Also I am doing soild motor and trans mounts
A M52 2.8l is the same across the board.
Bilstein and Koni are common names in street replacement hardware.
Ground Control and TCKlien offer Koni based coilovers, call and talk to them directly.
Bilstein produces a PSS9 CO kit.
Use E46M3 Coupe/Convertible Rear Shock Mounts.
Are far as Bushings go stay with Lemforder, same with Tie Rods and Control Arms.
People are saying that Meyle HD Control Arms are acceptable and they do eliminate the OE CA rubber isolated outer ball joint in stock 318/323/325/328 CAs.
Sent from my iPhone using Tapatalk
Last edited by bluptgm3; 08-02-2017 at 01:50 AM.
Bookmarks