Hello Experts!

First of all... happy holidays to all!

i kinda have a problem, i have a s54 into my e30 m3 race car, tune done by Frank Smith, everything is OK... BUT, i want to do an idle synchro because I've changed tips, etc.

The big problem is, that when i hit Next on DIS, it says "pilot conditions not met"
conditions are:

- Engine Idling for 5 minutes - Check
- Run Engine at Idle - Check
- Coolant Temperature > 80 C - Check
- All Additional Loads OFF( Ac/ Lights) - don't have that connected to the DME
- No relevant faults in DME - Only fault is EWS, but its because of the Swap
- Intake air Temp between 20 and 60 - Im running alpha N, with IAT, guess its OK
- Oxygen Sensor control active - both sensors are working
- sufficient level in tank - Don't know how to check this, as i don't have the OEM cluster, just the MSS54 Ecu..

please, do you suggest something? i really need to perform this procedure

THANKS!!