E36 racecar 2.8L ITR/STU/GTS spec3?
I am selling my E36 road-race car as its not in the cards for me to have both a hillclimb car and a road racing car. Car started as a 328i and still has a 2.8L engine and was originally built for ITR but there are a few upgraded things that may put it in another class. Since there are still items like door glass, heater core and full wiring harness the car can fit into many different racing organizations. It has a SCCA log book. It was raced last in fall of 2016 so it has a current SCCA annual tech sticker. The only thing preventing it from being 100% race ready is the lack of a seat and harnesses. It seems a race ready entry level ITR car is about 10-12K so I have priced this at $9200.
The interior of the car was painted to match the exterior and I feel it really makes the build much more presentable. There are a few scratches on the interior paint but overall it looks very good and neat. The exterior paint is fair although the hood is oxidized?but hey it?s a racecar! This would be a great starter racecar or a solid platform to pursue a GTS2 or STU build. Call Ken at 484-824-1661. Located in Morgantown, PA.
Shell: 1996 328i
IT legal 6 point cage + driver?s foot protection
NASCAR bars on drivers side. Bars give MAXIMUM elbow room for driver as they extend so far outward they touch the outer door skin. Only driver door is gutted. Driver window is easily installed for transport and storage. Passenger power window still works.
Dash bar goes THROUGH the heater box so it is straight with no bends
Floor plates are thicker, 3/16"
Welded-in bosses for belt anchors on both driver and passenger side. Two sets for different seating position on driver side.
Car weighs 2860 lbs with 180 lb driver and 3/8 tank of fuel
Engine 2.8L, stock M52 engine, M52 manifold and gearbox
BW 3" race exhaust
EPIC Tune: 180 WHP, 200 FT-LBS
ZF trans
SPEC clutch on stock DM flywheel
BW solid engine and trans mounts
SPAL fan
BW dual fuel pump kit
Suspension
AST 4100
Vorshlag camber plates
Reinforced stock rear lower camber arms
BW Solid subframe bushings
NEW rear ball joints
NEWER OEM axles
New rear wheel bearings
Poly RTAB
Reinforced RTAB pockets
Reinforced rear subframe
Reinforced Rear sway tabs
Turner Spherical rear upper inner bushings
Poly front CAB
Wheel studs
(5) Kosei wheels
3.15 LSD
BW solid diff mounts
Brakes
M3 front and rear Brakes
HAwk blue pads
Brass caliper slides
SS brake lines
Needs a seat, harnesses and the shifter could use new bushings.
List Date: 7/17/2017
For more info, click here to view the original listing: E36 racecar 2.8L ITR/STU/GTS spec3?
--------------------------------------
This item is no longer available.
--------------------------------------
BYOS (bring your own seat) and have a raceready car! Finally found some race results from last year, I turned a 117.8 at Jersey lightning.
96 328i ITR Racecar
95 M3 blk/blk - hillclimb project - http://forums.bimmerforums.com/forum....php?t=1798796 - Retired to street duty after two awesome seasons!
2002 325XiT - daily
Just FYI, 328 chassis are not legal for NASA Spec3. Would probably make a good donor for BMWCCA SpecE36, though. Good luck, looks like a nice build.
Deposit taken!
Sent from my iPhone using Tapatalk
96 328i ITR Racecar
95 M3 blk/blk - hillclimb project - http://forums.bimmerforums.com/forum....php?t=1798796 - Retired to street duty after two awesome seasons!
2002 325XiT - daily
Bookmarks