Hello. I recently purchased an E66. 2006 760Li to be exact. I am trying to figure out how to do a little coding on this one. I have an E38 and E39 and know my way around NCS Expert. However I am getting an error on the E66. The vin loads but when I choose my ecu I get the same error every time. Also I noticed that I don't think all of the modules to code are loading. I didn't see and LCM anywhere. All I want to do is turn off the DRLs. Can anyone help? Pic attached for reference of error I'm receiving.
Sent from my iPhone using Tapatalk
2001 E38 (Stroker Motor) / 2004 X5 4.8iS / 2006 760Li V12
Empty the MAN file and everything will be fine.
Gesendet von meinem HTC 10 mit Tapatalk
That's the original file right?
FSW_PSW.man
Sent from my iPhone using Tapatalk
2001 E38 (Stroker Motor) / 2004 X5 4.8iS / 2006 760Li V12
no, the MAN file is the manipulate file
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Got it. I'm not really sure how, but it a completely different program when exiting it asked if I wanted to delete the man file and I said yes. All good. DRLs are off now. There are so many modules in this 760. Thank you for the guidance.
Sent from my iPhone using Tapatalk
2001 E38 (Stroker Motor) / 2004 X5 4.8iS / 2006 760Li V12
Yes, NCSDummy program asks if you want to clear upon exit.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
So, while coding the DRLs off I saw law enforcement mode?? Does anybody know what this does? I was pretty tempted to turn them all on lol.
Sent from my iPhone using Tapatalk
2001 E38 (Stroker Motor) / 2004 X5 4.8iS / 2006 760Li V12
Bookmarks