Thinking about an off brand, can't spend $200 on a wheel right now...
Could be good
Solid warning
I have a bud with a knock off wheel and while it has some flex, it has been fine for quite some time. And I've pulled pretty hard on it and it isn't going to bend under any normal driving ..
I haven't decided what route I'm going. But I haven't ruled out a knock off yet.
Get what ya pay for...
1995 M3...Screwed
I've a Momo Quark, 310mm. Anything in 330mm range or lower destroys your visibility to the cluster. I don't think there would ever be a reason to just change the stock size and go to a stock size unless you are aiming for new m stitching or alcantera or something like that. The decrease to 310mm definitely puts the rack in your hands. Takes a little more effort to turn, but more response and quicker to the target.
Sent from my iPhone using Tapatalk
Weld one up out of a trucking chain.
^
and 10" diameter
Bookmarks