anyone used 40 mm wheel adapters on an e36 with 245's on a 8" wheel et round 40 and have clearance issues using 2" extended lcas , and does anyone have a brand they would recommend for wheel adapters
Take a look at the link below for a definitive fitment guide and feel free to give us a call at 888-280-7799 and one of our BMW part specialists will be happy to answer any questions on wheel adapters. Hope this helps!
Wheel Fitment & Spacing Guide
Your Trusted Source For DIY and Parts
FREE SHIPPING over $99 click here
BMW Parts | DIY Tech Articles | Facebook | Twitter | Instagram | YouTube | Promos
888.280.7799 | 6am - 5pm PST
E46 here, SLR Ultra Arms (54mm wider then factory) using 245/40r17 on a 17x8et20 (style 5) with 30mm spacers. No rub.
Yeah I'm at -10 total. And I'm not sure, I had the HARD motorsport flares installed before I did the angle kit.
E46 Also. Currently running stock arms with 32mm spacers and a 18x9 et44 (12 with spacers) with a 245/35 and I barely rub and only on massive bumps.
Edit: I ran the same spacers on my old e36 325is with an et33 wheel and a 245/40. zero clearance issues. But it did rub the fenders a good amount.
Edit again: Car had a complete m3 front end, shocks, swaybar, brakes.
Last edited by Jrcanes55; 07-13-2017 at 12:00 PM.
I too enjoy the feeling of another man's beard between my turd cutter's cheeks.
Status: Someone put glitter in my oil. Wait. Why's all my oil outside the engine? What's that knocking?
Wheels will be fine. Tire choice is key. I run 235/40/17 and had to trim bumper with the caster I have.(only about 5 degrees)
Bookmarks