E36 M Coupe / Roadster Engine Harness
Used engine harness out of a S52 M coupe / roadster. Great for spare connectors or to use as a basis for a stand-alone. Z3 platform is a bit simpler electrical than the E36, though the plastic housing, and probably the wire lengths, will be different than a E36.
$100 shipped CONUS
List Date: 7/10/2017
For more info, click here to view the original listing: E36 M Coupe / Roadster Engine Harness
--------------------------------------
SOLD
--------------------------------------
Last edited by osborni; 07-25-2017 at 04:47 PM. Reason: Sold
to the top!
- Ian
2000 M Coupe, stripped and DE prepped
46mm wheel bearing socket for rent - $30 deposit + $10 fee. PM for details.
Are all the connectors good? Do you know if this will fit in an e30?
As far as I know they are good. None appear to be crushed or broken.
I bought it as a spare years ago and never needed it. I have not tested every wire with an ohm meter.
It is an S52 harness. So if you are doing an engine swap with a short/long block or a motor without a harness, this is a good place to start, electrically.
Very likely you will need to trim or lengthen portions of it for a different chassis. The nice thing about the Z3 chassis is that it is just about the simplest 90s era engine and chassis era wire harness.
Last edited by osborni; 07-24-2017 at 11:32 AM.
- Ian
2000 M Coupe, stripped and DE prepped
46mm wheel bearing socket for rent - $30 deposit + $10 fee. PM for details.
Part has sold.
- Ian
2000 M Coupe, stripped and DE prepped
46mm wheel bearing socket for rent - $30 deposit + $10 fee. PM for details.
Bookmarks