Member
I am selling a single mass e28 fly wheel and clutch/pressure plate for 140 plus shipping. This will fit in a large flat rate box for 18. This is for the 535i. You can use everything else stock.
Loose 12 lbs by getting rid your dual mass fly wheel. I did this to my 535i and I loved it.
Andy
Last edited by south42; 07-12-2017 at 10:34 PM.
Member
Did it rattle? Do you know if this is the lighter of the 2 e28 flywheels?
"Big Red" 9/88 Build 535i/5: E.A.T. Chip, 24lb Bosch Design III, 3.46 LSD, 4x Clear corners, DINAN-style 750i muffler, Racing King Subframe Inserts, Koni/Vogtland suspension, E34 M5 swaybars, Brembo/Porterfield brakes, Turbodiesel grills, 16" Style 8 rims, Euro front plate, M5 rear filler plate.SaveSave
Member
Single mass fly wheels do not rattle. This is the stock e28 fly wheel, it is 22 lbs. sorry this is not the m5 fly wheel.Originally Posted by sbeckman7
Andy
Last edited by south42; 07-12-2017 at 10:34 PM.
Member
Ah ok, someone correct me if I am wrong but the stock flywheel's are dual-mass (the ones that don't rattle) no?
"Big Red" 9/88 Build 535i/5: E.A.T. Chip, 24lb Bosch Design III, 3.46 LSD, 4x Clear corners, DINAN-style 750i muffler, Racing King Subframe Inserts, Koni/Vogtland suspension, E34 M5 swaybars, Brembo/Porterfield brakes, Turbodiesel grills, 16" Style 8 rims, Euro front plate, M5 rear filler plate.SaveSave
Member
You are right, meant to say stock e28. This is the normal 22lb one out of a 86 535i.
Andy
Member
Is the flywheel and clutch still available?
Member
Sorry has been sold. I do have a good dual mass set up.
Andy
Member
Andy, I'm looking to get rid of my dmf setup, but thank you!
Posting Permissions
Reply With Quote
Bookmarks