I'm preparing to replace my top and I'm trying to make sure I've got everything lined up. On the top, the rear gasket (54318135273) and window seals (54318204149/54318204150) are joined together with a specific glue. As this join flexes every time you operate the top, it's pretty critical to get right. Does anyone know what that glue is?
"Howdy, Folks!"
1986 Delphin 528e - Roof rack equipped lumber hauler.
1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
1998 Avus Blau 328iC - Someone else's project now
2008 Platinum-Beige X3 3.0si - Current project
2012 Alpine White X3 xDrive35i - My new snowmobile.
2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.
Are you replacing the rear seal? Just curious as I'm planning out the same project. I plan to use industrial grade solvent contact cement for the glue. I have some DAP Landau Top & Trim that I got from an upholstery shop for an interior project. I've read that 3M 8090 will work too and I think you can pick that up at Amazon or order from one of the local auto part stores.
A number of years back I had the join between the rear gasket and window seals fail. I ordered a new rear gasket but when I went to install it, I realized the rear window seals also needed to be replace. At the time I wasn't ready to drop $500 on new seals. However I did find a reference to the correct glue. Now that I'm ready to do those seals, I can't find where that information came from. I'm almost certain it was from a BMW source.
"Howdy, Folks!"
1986 Delphin 528e - Roof rack equipped lumber hauler.
1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
1998 Avus Blau 328iC - Someone else's project now
2008 Platinum-Beige X3 3.0si - Current project
2012 Alpine White X3 xDrive35i - My new snowmobile.
2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.
Well I found the answer in TIS document RA (Repair Information) 5431020. The answer is Loctite 380.
"Howdy, Folks!"
1986 Delphin 528e - Roof rack equipped lumber hauler.
1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
1998 Avus Blau 328iC - Someone else's project now
2008 Platinum-Beige X3 3.0si - Current project
2012 Alpine White X3 xDrive35i - My new snowmobile.
2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.
"Howdy, Folks!"
1986 Delphin 528e - Roof rack equipped lumber hauler.
1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
1998 Avus Blau 328iC - Someone else's project now
2008 Platinum-Beige X3 3.0si - Current project
2012 Alpine White X3 xDrive35i - My new snowmobile.
2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.
Thanks for posting that. Looks like Amazon carries it but a bit pricey for 1 oz adhesive. I know I need to replace the rear seal. Hoping the side seals are still good since they are very expensive. Can I ask what top you chose to use?
Haven't bought yet. Looking at topsonline.com though. There's a 3g package of the Loctite 380 around for the adhesive. Do a google shopping search. Be very careful separating the old rear seal from the side seals. Try a google image search on the side seal part number to get an idea of the attachment point.
"Howdy, Folks!"
1986 Delphin 528e - Roof rack equipped lumber hauler.
1989 Zinnoberrot 325iX Sedan - I miss this car. (Deceased)
1998 Avus Blau 328iC - Someone else's project now
2008 Platinum-Beige X3 3.0si - Current project
2012 Alpine White X3 xDrive35i - My new snowmobile.
2020 Estoril Blue 440i xDrive cabrio - This car is a blast to drive.
Bookmarks