E36 with asd hydro help

[khern1290]

what's up guys I need help setting up my asd hydro. The hydro has a 5/8 slave like the site says. My e36 has abs so I pulled the relay and taped in right after the brake master and before the abs unit. I used the h line which should be rear brakes. Now the handbrake works I just have to pull it really hard like slide me foward in my seat hard hahaha. I just don't know if mayby taping in before the abs unit is killing my power and I should tap in under the car right to the rear.

[Substance D]

what's up guys I need help setting up my asd hydro. The hydro has a 5/8 slave like the site says. My e36 has abs so I pulled the relay and taped in right after the brake master and before the abs unit. I used the h line which should be rear brakes. Now the handbrake works I just have to pull it really hard like slide me foward in my seat hard hahaha. I just don't know if mayby taping in before the abs unit is killing my power and I should tap in under the car right to the rear.

I have the same setup...it is hard to pull and won't lock up in a straight line...just kinda how inline works with our calipers. If you flick then clutch kick then pull it. It works bitchin. Just takes some getting used to. Make sure it's bled all to he'll too

[Mikestokman]

Nah your shit is fucked, I've ran 5/8 inline and locked 245's straight line with stock 318 calipers. Cut the single line that runs under the floor and tap into that. Works best