My Error...post should have read "Seats will not go up or down". Both seats are stuck in the highest position. I pulled my seats and tried this suggestion (see post #7) but I don't know if it will work.....https://www.bimmerforums.com/forum/s...c+seat+problem It appeared to me the aluminum housing rotated freely on the threaded spindle before trying this method. I don't think I accomplished anything. Before I put the seats back into the car, is there anyone who has had this problem and resolved it a different way? BTW how did both passenger & drivers seat have this problem..... at the same time? I checked the fuse but it appeared to be ok. Had it been the fuse, the seats would not have worked at all. Open for some help.
Last edited by MORRIE; 06-19-2017 at 03:15 PM.
Here's one possibility:
https://www.bimmerforums.com/forum/s...6#post16839816
In your case, perhaps both seats are stuck because both got run up to the top and jammed there.
Otherwise, there are several other threads on the up/down problem that I could post.
BMW MOA 696, BMW CCA 1405
Bookmarks