Member
This is a 67k mile engine. Was told it was from a 2005 but the rods and wiring harness tells me this is an earlier model engine.
BAD:
Cyl 5 piston rings were shot. It looks like the cyl 4 rod bearing spun.
GOOD:
Everything else to include the head gasket, main bearings, and the cylinder walls all looked good. Even the cyl wall for cyl #5 looked good, no evidence of gouging, scratches, etc.
Includes block, head, crank, heads, 6 pistons, 6 good rods, cams, timing chain w/ guides, crank damper, oil pump chain, front timing cover, and engine brackets.
$1000 plus shipping and PP fees. Paypal is kjd1976@live.com.
Shipped via freight (~$150 depending on location).
Block and cylinder bores
Cylinder that lost compression...
Cyl head
Crankshaft
Cams
Last edited by bigjae1976; 07-02-2017 at 05:19 PM.
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
to the top
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
Bump
Sent from my iPhone using Tapatalk
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
ttt
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
to the top
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
cylinder head and cams sold.
Block, crank, pistons, rods still available.
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
Ttt
Sent from my iPhone using Tapatalk
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Member
to da top
2011 E90 ///M3 Individual
2004 ///M3 - Track Car
Posting Permissions
Reply With Quote
Bookmarks