Hi,
I acquired a 1986 745i executive a couple of weeks ago. Well maintained by 13 year Previuos owner. Aftermarket Garret turbo with wastegate installed with 3" magnaflow exhaust and K&N type intake installed PO. So I have some learning to do regarding turbos. This is the third e23 I've owned but the first turbo.
Everything seems to work fine, but why do my directionals blink really fast? I've checked all the bulbs, all are working. Also, only one headlight works unless I turn the fog lights then both headlights come on. Hi beams work fine. I have a feeling some wiring was hacked when the car was federalized.
Oh, the wheels. Not e36 wheels. Some kind of knock off set. 17" et20 so no spacers needed.
Planning to drive it to The Vintage in NC this weekend.
Wish me luck.
John
Last edited by JMinNJ; 05-03-2018 at 08:10 PM. Reason: Updated
Looks good, congrats.
Fast blink is usually a bad ground. Look forward to seeing this at Vintage.
1989 635CSi Alpinewieß
1989 325iC Alpineweiß II
1985 745i Cosmosblau / Pacificblau cloth
1995 525iT S50 / 5 speed Alpineweiß III
1985 635i Cosmosblau
1998.5 M3 Technoviolent
1990 325iC
1999 528i
i commented on the wheels on Facebook, they look good on the e23. Makes sense that they're aftermarket now, with the correct offset.
Car looks good, look forward to more pics.
Mike
93 M5 3.8 Sterling Silver/Black (euro)
94 M5 Touring Madeiraschwarz/Black
80 745i (project)
83 735i / 5 speed (euro)
86 745i
Glad to see that car here. A few of us saw the thing on ebay.
Pictures of the upgrades would be fun to see.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Yes. Not the best eBay listing and the car was in storage so I couldn't see it. But since it was only 10 minutes away I Let the seller know I was still interested. Really clean and fast car. I'll get some pictures up in the near future.
Its ready to drive to The Vintage. New tires, refurbished Becker Mexico, fresh fluids, valve adjustment, recharged AC, and a nice hiway drive tonight has me feeling pretty good about the 1400 mile round trip to Asheville.
BTW the rapid flash was due to the wrong size (small) bulbs.
talk to you soon,
john
Looks very clean. Also interested in the turbo upgrade.
alpinweiß on anthrazit buffalo 1984 745i, 2014 Fiesta ST, 1984 635csi 1986 635csi 1987 L6 1999 M coupe 2002 M3 1995 325i 1976 2002, 2001 996 TT 1994 850 T5 wagon 1998 GTi VR6 1983 scirocco
I remember seeing this on ebay. I had told the owner to list it on BaT and he ended up replying and giving me his cell phone number. Not sure how that worked out....
Glad to see someone here got it. I still have yet to see another 745i on the roads, someone a mile down the road from me has a black US spec 733i or 735i sitting in the driveway, been meaning to hop in my car and knock on the door.
2000 BMW M5 Evolve Alpha-N Tune, Evolve Carbon Fiber CAI's, UUC Short Throw Shifter, Dinan Front STB, Dinan Rear Sway Bar
2001 BMW 330i Dynavin N7 Pro
1985 BMW 745i 18" Style 37's, Team745i Chip, Getrag 265/6, Clutchmasters FX-300, UUC Short Throw Shifter, Strut Tower Bar, Bilstein HD's ("Build" Thread")(SOLD)
1986 BMW 735i Getrag 265/6 Swap, Strut Tower Bar, Bilstein HD's, Euro F/R Conversion, 3.46 L/S Diff (Scrapped)
2016 Ford Mustang GT Performance Pack Stock
2004 Mercury Marauder Eaton M112, 3.4 Billetflow upper, Accufab SBTB + Plenum, 4.10's, Stainless Works LT's, 2.5" Exhaust, Borla Stingers, FX-R projectors, Addco F/R swaybars
2003 Mercury Marauder JLT CAI, SCT Xcal4, Stainless Works LT's, SW 2.5" Catback
1996 Ford Bronco 4" lift, 35" BFG A/T's, MH1 projectors
Hi,
So I’ve had my e23 745i for a year. I’m learning more about “upgrades” by the PO. This is my first turbo.
It Has an e28 fuel system wiring harness and chipped 059 ECU installed. I don’t know which chip is installed. PO can’t remember. Since it has an e28 fuel system harness does that mean it has e28 injectors? The car is running rough right now. I suspect it’s a fuel issue.
Any performance chip recommendations?
93E77047-2C9B-47D0-9B5E-00855369AB31.jpg
This is the wastegate installed. Anybody recocogize the brand. My boost gauge stopped working, could the wastegate be the cause? I’m think about buying the Miller unit for sale on the forum. Is that good upgrade. Garret turbo unit is also installed in the car.
8B80EEC8-EAE2-4D2D-A9E7-E589B26D042D.jpg
Also so has a “boost control” gauge. PO said he never adjusted it in all the years he owned the car. I’m afraid to mess with it. Any advise?
CE99108B-1A50-4E8C-ACBD-2E5BB22DA46B.jpg
Other than what I’ve mentioned and an adjustable fuel pressure regulator, the engine is completely stock.
Id like to get it running smoothly.
Thanks,
John M
Last edited by JMinNJ; 05-03-2018 at 08:12 PM.
I'd bet that the ECU has been chipped but not understanding at all why it's running on a 059 ECU- I'd pull the ECU and double check that.
That wastegate looks like a team745i unit or for sure a modified original to allow for more boost. Also looks like your magnetic valve isn't hooked up/missing a vac hose.
That knob is an internal cabin boost control, allows you to dial in more/less boost from inside the car.
I'd make sure all vac lines are hooked up correctly including rrfpr before I'd play with that boost control.
Car looks good, don't remember seeing it before
Last edited by kojo96; 05-03-2018 at 09:21 PM.
Thanks for the reply. I’m told the 059 ecu was installed to be compatible with the e28 harness.
I was wondering about that magnetic valve. As the picture shows one of the vac connections on the magnetic valve is capped the other connects to the wastegate. Where should I run a vacuum line from to the capped connection on magnetic valve? Also, should there be an electrical connection to the valve?
sorry if these are dumb questions, this turbo stuff is new to me.
I will be checking the lines to the boost gauge soon to make sure they are all intact.
Last edited by JMinNJ; 05-03-2018 at 11:10 PM.
Nice looking car!
The 059 ecu isn’t much better than the factory 745 unit. It’s still on motronic 1.0, which is less than desirable for turbo applications.
Are you looking to get this running with what it has or improve it?
First step is to make sure there are zero vac leaks. Is it running the icv from the e28 as well? I imagine so. Take a shot of the engine bay and post it here. I bet you have quite a bit of hodge podge wiring and vac stuff going on.
When your enemy is making a mistake, do not interrupt him.
Yes on the e28 ICV. The car ran great on a 1500 mile trip last year. Then it start running bad delivering to much fuel. But it was intermittent. Sometimes it would run fine some times really rough and stall. Also hard to start sometimes acting like it had vapor lock and barely crank. Replaced the FPR but that didn’t help. My mechanic replaced the 059 icu with a used one, swapped in the performance chip from the old one and that seemed to solve the problem. It’s running rough again but not as bad as last time.
if I’m going to replace the ICU again I would like to upgrade and also replace the injectors.
any suggestions or direction would be greatly appreciated.
Here are some pics of the engine bay:
59DE0AEC-C000-4ED6-A89B-203643B44887.jpg
I have a starte up button wired in th diagnostic port due to a faulty insinuation switch I’ll be replacing soon
7BDF8ED5-8E32-4C34-A52B-5FE153ECC00F.jpg
Three added relays. Need to find out what they’re for:
45BBD35C-8001-4CD6-9CF2-5EE29D5389BF.jpg
60C8484F-44D1-432B-B307-AF44F5DF6C4D.jpg
Thanks
Bookmarks