Bay area INPA, DIS, ISTA, AK90, NSC Expert willing to help.

[luka117]

Hi guys I just move to San Jose and if anybody need help with diagnostic, reset airbag light, activate new function, programming new key to your EWS etc, add new module, coding, retrofit etc.
I can help with this.

I do all cars from late E36 to 2008 year (DCAN)

Programming new keys with EWS I, II and III

[garageV]

where are you located and how much for a key on a 01 e38? picking one up from a tow yard and it has no key

[luka117]

PM sent

[fossum]

Why'd you move! I'm in Spokane and need a EWS alignment You think you could help me get my cable/INPA to work? It seems to be installed, but I get an error when doing anything other than reading codes.

apiresulttext error 19
ifh-0009 no response from controlunit
api job error no such result

[Atomistic]

I'm in Oakland and am trying to program an eBay key with the AK90. It seems to go fine when I program it - when I test the key it has the correct VIN. PA Soft shows a fault in the EWS that says the password is wrong for Key #4. I don't have any idea how to get the key to have the correct password. Is there a procedure or sequence to get the key synced with the EWS? I'm familiar with EWS>DME sync in INPA, but I think this is different

Here are the errors from PA Soft:

EWS	Hex: 42	Dec: 066	Wrong changing code - key 4
EWS	Hex: 41	Dec: 055	Wrong password - key 4

Thanks in advance

[luka117]

I'm in Oakland and am trying to program an eBay key with the AK90. It seems to go fine when I program it - when I test the key it has the correct VIN. PA Soft shows a fault in the EWS that says the password is wrong for Key #4. I don't have any idea how to get the key to have the correct password. Is there a procedure or sequence to get the key synced with the EWS? I'm familiar with EWS>DME sync in INPA, but I think this is different

Here are the errors from PA Soft:

EWS	Hex: 42	Dec: 066	Wrong changing code - key 4
EWS	Hex: 41	Dec: 055	Wrong password - key 4

Thanks in advance

What kind of chip in your new key have?
PCF7935?

Its strange. If you have time we can meet in San Jose and I can try to fix it. I have some spare chips

[luka117]

Why'd you move! I'm in Spokane and need a EWS alignment You think you could help me get my cable/INPA to work? It seems to be installed, but I get an error when doing anything other than reading codes.

apiresulttext error 19
ifh-0009 no response from controlunit
api job error no such result

Hi!
What cable do you use? Link?
And what version of INPA?

[FreshFish745i]

you still in san jose i need a sync e66