Looking for plastic engine undertray piece

[buzzboy]

I removed my sporty undertray and lip that were on my car when I bought it. Now there is this gap in the factory undertray. I've been searching RealOEM but I cant' find this specific piece. What is it called?
DF7TwzD.jpg

[LockDots]

Belly Pan: https://www.ecstuning.com/b-genuine-...n/51712250643/

You may also want the panel that helps direct air towards the radiator: https://www.ecstuning.com/b-genuine-...t/17112227690/

Or better yet you can install the Motion Motorsport under tray. With this you don't end up needing the factory belly pan or flimsy pork chops that hold it to the bumper. This splash panel actually reinforces the bumper as well: https://www.motionmotorsport.net/col...ant=3698265540

[buzzboy]

Perfect, thanks!

[Nanniepoo]

Belly Pan: https://www.ecstuning.com/b-genuine-...n/51712250643/

You may also want the panel that helps direct air towards the radiator: https://www.ecstuning.com/b-genuine-...t/17112227690/

Or better yet you can install the Motion Motorsport under tray. With this you don't end up needing the factory belly pan or flimsy pork chops that hold it to the bumper. This splash panel actually reinforces the bumper as well: https://www.motionmotorsport.net/col...ant=3698265540

I'm assuming since you're recommending this for a non-M, that it will indeed work on a non-M? I'd like to get one since my plastic panels are pretty well destroyed from the low clearance when the white slippery stuff is on the road.

[LockDots]

I'm assuming since you're recommending this for a non-M, that it will indeed work on a non-M? I'd like to get one since my plastic panels are pretty well destroyed from the low clearance when the white slippery stuff is on the road.

I recommended it based on the M bumper in the picture he posted and the one in his sig. I don't think they'll work on the non-M without modification.

[Nanniepoo]

I recommended it based on the M bumper in the picture he posted and the one in his sig. I don't think they'll work on the non-M without modification.

Ah, I missed that. Well crud.

[JEC928]

Belly Pan: https://www.ecstuning.com/b-genuine-...n/51712250643/

You may also want the panel that helps direct air towards the radiator: https://www.ecstuning.com/b-genuine-...t/17112227690/

Or better yet you can install the Motion Motorsport under tray. With this you don't end up needing the factory belly pan or flimsy pork chops that hold it to the bumper. This splash panel actually reinforces the bumper as well: https://www.motionmotorsport.net/col...ant=3698265540

Much thanks!

Here it is on Real Oem:
http://www.realoem.com/bmw/enUS/show...diagId=51_2048


EDIT:
Oh, my. I just clicked on the aftermarket solution... me likey. Me going to DIY a similiar setup...

[LockDots]

Much thanks!

Here it is on Real Oem:
http://www.realoem.com/bmw/enUS/show...diagId=51_2048


EDIT:
Oh, my. I just clicked on the aftermarket solution... me likey. Me going to DIY a similiar setup...

Pretty sweet, right?