Can this be? Original Radiator as far as I can tell, and the temperature sensor had no gasket 32411093596 when I removed it? Far as I can tell, never had a leak there.
So, all I need is this stupid 25 cent part. Think I can get away with any 14mm gasket there? I see the new ones are metal? Onto a plastic housing? Doesn't seem right, but no o-ring groove. Thoughts?
I just hate to put it all together and have it leak, there's a decent amount lot of coolant to lose to replace that.
--Scott
There isn't a gasket on either of my cars right now I don't think. For sure not the M3. No leaks. Of course ymmv.
You wouldn't lose much coolant to add it later, just plug the whole with your finger while adding the gasket.
Caprica Junkie
Mine doesn't have a gasket either. Wasn't there when I replaced my sensor, so I didn't put one on. No issues.
Feel free to ask about my car:
TRM Coilovers 560f/784r | Epic Motorsports Tune | Apex Arc-8 17x9.5 et35 | Wilwood SL-4 BBK
M50 Manifold | ASC Delete | Dinan BBTB | Fan Delete | Power Pulleys | Dinan CAI | S54 Oil Cooler
Z3 Rack | Crossbrace | 3.38 LSD | Dinan Strut Tower Brace | AKG Chassis Mount Shifter
SS Long Tubes | SS Race Exhaust | LTW Replica Wing | MM Underpanel | CF Sunroof Delete
OE GT Front Splitter | Rear Rollbar | Rear Seat Delete | BW Fuel Starvation | Turtle Labs Door Panels
And Really Old Paint
Check out my YouTube channel for more DIY's and videos about my E36 M3
Thanks for the replies. Glad to hear. I did get one and put it on before I saw these posts. We'll see how it goes.
Bookmarks