Parting out my whole build due to a fender bender. trying to keep everything complete as possible and sell the motor together with the whole turbo kit. Motor had 130k when I picked It up and all turbo stuff has 6k on it. This is what the turbo kit will include
M52b28 out of a 96 328i
Oil pan taped for drain and 10an drain
Arp head studs,
Cut ring gasket with copper spacer
Head resurfaced by hunter machine in SLC utah as well as new valve stem seals ( have invoice)
T4 Borg warner s360 .86 hot side
Rally road 4an feed
Good n tight 24v manifold
Tial 44mm WG
Tial 50mm bov
M50 manifold
Inovative wideband
Auto meter boost gauge
Rk tunes obd 2 turbo tune in dme
Deka 60lb injectors,
24v swap obd2 wiring harness with obd2 port in glove box.
Stainless 3" downpipe with morman flange
All aluminum Charge piping and couplers
Big eBay intercooler
Hallman boost controller
eBay turbo blanket
Spal 16" puller
Will include all accessories and everything on motor
Car was running really good and was wicked fast on 16 psi. Car just isn't worth saving to me. This is a Turn key 500hp e30 setup. can compression test for anyone serious.
Price is 5000+shipping
Message for phone number if seriously interested.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
So much awesome
Sent from my iPhone using Tapatalk
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
Bump all turbo stuff sold, motor for sale still. 1600+ shipping
Sent from my iPhone using Tapatalk
glws!
Did you sell the boost gauge with the turbo bits? Interested if you still have it.
Pm me what your looking to get for it.
Trying to sell my gripforce stage 4 kit for 200+shipping. Don't know how much life is left but if only has 6000 miles on it
Sent from my iPhone using Tapatalk
Bump, will cut you a good deal
Sent from my iPhone using Tapatalk
Everything is pretty much gone now, thanks guys
Sent from my iPhone using Tapatalk
any chance spal puller fan is still around
1995 M3 Alpine on Dove
AA Turbo manifold HX40 T3 CES 3" Piping Mishimoto R Line intercooler Turbosmart Ultragate & Raceport BOV CES Cutring 115# RK Tune E85 Aeromotive FPR Walboro 485 DKM Twin Disc Innovate SCG-1 & ECB-1 Porsche BBK FitmentLab Overfenders Hamann PG1's
1997 M3 Estoril on Rain
AC Schnitzer Type 1's Bilstein PSS9's Turner: Monoball camber plates, rear camber arms, front & rear sway bars w/ reinforcements Supersprint Long Tubes
AP Racing BBK
Do you by any chance still have the charge pipes? If so id love to buy them.
[OO=[][]=OO]
All parts are long gone sorry boys
Sent from my iPhone using Tapatalk
Damn. Well in that case, what bends did you use to route the cold side? Looked hella clean!
[OO=[][]=OO]
Bookmarks