WINKFP Daten Update - Errors and force closes

[phamine]

Tried to manually update (PDF Attached) as well as used the BMW coding tool (http://www.bmwcoding.com/showthread....MW-Coding-Tool) to update the daten files for winkfp.

I can't get winkfp to properly open.

CoapiKfInit: Initialization error!



Tried to open the following files with wordpad from what I've read should fix it but has not.

C:\EC-APPS\NFS\DATA\gdaten



What other steps I need to review to get it to begin working again?

RESOLVED:
You have to use wordpad to open and save the following files:

HISTORIE.BSU
NPV.DAT
PRGIFSEL.DAT
SGIDC.AS2
SGIDD.AS2

[328 Power 04]

Use wordpad to open historie.bsu and save it as same file. (Just open and save as historie.bsu, that's it, don't change anything).

Repeat with npv.dat and prgifsel.dat as well.

[328 Power 04]

I hope you know how to fix the .AS2 for the extra long lines that cause errors too.

[enda320]

Rightclick on some of those files, and check they don't have the crappy "this file might have come from a different computer" message, you'd see an unblock at the bottom of the properties tab.

[phamine]

Use wordpad to open historie.bsu and save it as same file. (Just open and save as historie.bsu, that's it, don't change anything).

Repeat with npv.dat and prgifsel.dat as well.

I didn't open historie.bsu. Doin g so fixed the issue. Thanks

I hope you know how to fix the .AS2 for the extra long lines that cause errors too.

I used the BMW Coding tool. I assume that it commented out the long lines automatically

[sickwayne77]

An update to an old thread here.
I am new to this type of work and just installed standard tools through bimmergeeks.
I just got the same error message as the OP and I saw he opened and saved:
HISTORIE.BSU
NPV.DAT
PRGIFSEL.DAT
SGIDC.AS2
SGIDD.AS2
I found the files, opened and saved, but no improvement.

so then I saw where the OP found those files:
C:\EC-APPS\NFS\DATA\gdaten
and that is not where I found those same files.

I found them here:
C:\EDIABAS\Bin\Server\data\gdaten

So, i just copied and pasted them where the OP had called them out and now my WINKFP opens up as I suppose is normal.
I haven't used the software, but it does atleast open now where it did not before.
Old thread I know, but thanks for the help!

[elecauto]

Hi:

I update with bmwcodingtool
Can you help me to fix error with .as2 file ?

Thanks

[CrazyOneToo]

Hi:

I update with bmwcodingtool
Can you help me to fix error with .as2 file ?

Thanks

How do you update? I am having same issue and the above did not help.
Thanks

[R52]

Find and Edit C:\EC-APPS\NFS\BIN\Winkfpt.ini

The correct version looks like this:

KOMFORT_MIT_AIF=OFF


; Trace
API_TRACE=0
IFH_TRACE=0


; ACHTUNG bei Änderung von CabdFormat muß auch im File ..\CFGdat\coapi.ini
; entsprechend CabdFormat geändert werden.
CabdFormat=IPO
; IPS --> PABD Quelle
; IPO --> Übersetzte PABD
; COM --> Compilieren der PABD


SPRACHE=eng
LastWDPImportPath=C:\Users\DELL\Desktop\E60\data
PROGRAMM_ERZWINGEN=OFF
BSU_ZULASSEN=OFF
ANZEIGE_KERNFUNKTION=ON
ErrorLogPath=.\
ExpertKonfPath=C:\Diagprog
KomfortKonfPath=C:\NFS-Backup
CoapiSearchPath=C:\EDIABAS\Bin\Server <--------------------------- this used to be ".." on mine and now it works


[HW-Interface]
K-Line / ADS=ADS
K-Line / EDIC=EDIC
K-Line / OBD=STD:OBD
CAN / EDIC=EDICC
CAN / Vector=STD:CAN
Most / Optolyzer=STD:MOSTO
Most / PC-Karte=STD:MOSTP
Funk / MDA=STD:FUNK
Ethernet / ENET=ENET
[Expert-Modus-Konfiguration]
KF_HW_INTERFACE=
KF_DIAG_PROT=BMW-FAST
KF_PSGBD=08flash.PRG
KF_PABD=
KF_SG_ADR=18
KF_DATEN_DATEI=A7564227.0da
KF_PROGRAMM_DATEI=7563275A.0pa
KF_HW_INTERFACE_UNIT=
KF_NAAB_DATEI=

[Hotchkess]

For me, what ended up fixing my issue was when I went to search for the files in C:\EC-APPS\NFS\DATA\gdaten, my gdaten file was completely absent. Instead, it was located in the C:\EDIABAS\Bin\Server\data\gdaten location.

Like sickwayne77 did, I had to copy the files from EDIABAS and paste them into the EC-APPS location. I just wanted to clarify though, I had to completely copy the whole gdaten file and paste it with all of the subfiles inside from the EDIABAS location. Just a heads up, as that is what fixed my error.

[Georgv]

had the same issue, updating sp daten via bmwcodingtool helped a lot