Results 1 to 5 of 5

Thread: 645CI Valve Oil Seal issues?

  1. #1
    Join Date
    Mar 2017
    Location
    Melksham, England, UK
    Posts
    5
    My Cars
    2005 BMW 645CI

    645CI Valve Oil Seal issues?

    I have heard of horrendous issues with the 645 V8 valve oil seals going at relatively low mileage. I am concerned to hear this as I have just bought my 2005 645CI with 66K on the clock - there is a genuine BMW full service history with the vehicle. It doesn't show any blue smoke on start up, idle or throttle blip, but can anyone advise me of anything else I should check?
    1) How much typically would it cost to have the valve seals replaced? Through a good Indie?
    2) Is it worth bothering with as the car won't be doing long journeys very frequently?

  2. #2
    Join Date
    May 2017
    Location
    Indianapolis
    Posts
    1
    My Cars
    4
    I just bought same vehicle model year etc. and have the same future concerns. The car has no symptoms and I am wondering how to be proactive regarding this potential issue. Do the valve seals fail in all these vehicles?

  3. #3
    Join Date
    Jan 2007
    Location
    .
    Posts
    7,708
    My Cars
    .
    Don't worry about the valve stem seals until it becomes an issue.

    Oil consumption of more than 1 quart of oil in 1k miles, or smoking from the tailpipes after an extended idle, such as a long traffic light.
    ASE and BMW Master Certified Technician

  4. #4
    Join Date
    Mar 2012
    Location
    Chico, CA
    Posts
    27
    My Cars
    2005 645Ci convertible
    [QUOTE=White94RX;29718085]Don't worry about the valve stem seals until it becomes an issue.

    Oil consumption of more than 1 quart of oil in 1k miles, or smoking from the tailpipes after an extended idle, such as a long traffic light.[/QUOTE


    Are there other issues to be concerned with beyond topping up the oil more frequently ?

    What might be the approx cost to have a shop correct this?

    Thanks!

  5. #5
    Join Date
    Nov 2011
    Location
    Ireland
    Posts
    7
    My Cars
    1999 E46
    I've seen some crazy prices for getting this done, but a number of posts I've read suggests you can get it done for around 2.5k at an indie shop. This guy is offering the service for that...

    http://www.bimmerfest.com/forums/sho...970&highlight=

Similar Threads

  1. Is it bad valve stem seals causing large oil consumption
    By E39Status in forum 1996 - 2003 (E39)
    Replies: 26
    Last Post: 10-31-2012, 06:57 PM
  2. '95 Cyl. 8, oil fouling - valve guide / seal?
    By mgoods50 in forum 1995 - 2001 (E38)
    Replies: 18
    Last Post: 08-24-2012, 01:46 PM
  3. 04 545i Valve Cover and Oil Seal Block DIY??
    By kryll74 in forum 2004-2010 (E60,E61)
    Replies: 3
    Last Post: 04-26-2011, 06:03 PM
  4. Oil consumption \ Valve stem seals
    By DeeM3 in forum 1992 - 1999 M3 (E36)
    Replies: 5
    Last Post: 10-17-2004, 10:45 PM
  5. Major Oil Pan Issue - HELP
    By mdv in forum General BMW Mechanical Help sponsored by RM European Auto Parts
    Replies: 7
    Last Post: 01-05-2003, 12:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •