Need pics of Z3s w/ lowering springs

[kyrix1st]

Considering running 7", 550 front 6" 700 rear.

However, it seems that many go for 6" front, 5" rear instead.

I don't want to scrap my exhaust every time I climb on bumps, but it would be great if I could get pictures for either settings.

Thanks!

[bionicbelly]

I had 5" on the rear, but got rid of them in favor of the 6" springs. I kept getting coil bind with the 5"ers. The 6" springs do not allow you to get very low though, if that is what you are after.

[kyrix1st]

Nope, my car stances like a truck right now. Just trying to fix this issue.

[kyrix1st]

I'd also like to know spring diameter for front shocks. Bilstein B8 is identical to the stock spring (can be used).

[BladeRunner919]

Nope, my car stances like a truck right now. Just trying to fix this issue.

There is something definitely not right there. That looks way higher than standard - have you taken measurements to check the ride height? I'd say that has the wrong springs on it.

[kyrix1st]

There is something definitely not right there. That looks way higher than standard - have you taken measurements to check the ride height? I'd say that has the wrong springs on it.

I got 7 inch springs (550lbs) installed today on rear, and it looks much better. So I need to know front spring diameter for Z3M S54 specced shock mounts to get the correct springs. I assume I'll go with 6 inch front.

[ZoO]

I don't have lowering springs, but I use 6" 425 lb front springs with adjusters at its lowest setting, and 6" 525 rear springs no adjusters only pads. Look up my perviously started thread for a picture.

[kyrix1st]

2h6yqok.jpg

Got my lowering springs. I'll update the pic after it is installed.