i picked up this AFR kit that comes with gauge and a wideband O2 sensor. https://www.amazon.com/gp/product/B00NBFHS10/
does it plug in to replace the stock front sensor - if so which one of the 2? or do you tap a new location on exhaust manifol - if so where?
this writeup https://sites.google.com/site/bmwm3stuff/Home/gauges replaces stock O2 sensor, however, this would only measure bank 1 (cyl 1, 2, 3). How do I set it up to measure exhaust from all cylinders?
PS. can it be installed in the rear sensor location since the cats are going away anyways? if a tailpipe AFR sensor does it, does wideband has to be all the way up front?
Last edited by verobeach97; 03-22-2017 at 08:43 AM.
If You have original ECU which works with closed loop, you better do not replace oem lambdas. If You want to see what is going on over there, probably make some x or y pipe and attach ur new afr sensor somewhere in between.
Bookmarks