OK ECS shows one and they are over 170.00 Each..Is that possible!?
Any hints on where to get these guys? If I need one, I need two, right?
Are they interchangeable with any other car like an E38?
thanks!
B
Brian A Silverton, OR
'85 Euro 635CSi 5 speed conversion
'87 L7
'93 Euro M5 3.8
'93 740i
'94 850CSi #31
'95 540i Msport 6 speed
'96 M3/4/6 Euro 3.2l
'03 M3 Cab
'12 X5 3.5D Tuned
Unofficial 1995 BMW 540i MSport registrar (please see Facebook BMW 1995 BMW540i Msport registry group to join or report a sale)
04 Absorber 25N 1 51161954684
05 Gas pressurized spring 1 51161948137
realoem still shows the old cheaper price, but they went up in price drastically http://www.realoem.com/bmw/enUS/show...diagId=51_1035
As far as I know, nothing else fits. On the German 7 forum somebody had ordered the 51161948137 from a shop made in 2014 and sold it for less than $50, but no longer available.
The dampened gas spring pushes/swings the glovebox towards direction the seat when opened.
I had collected some data on that
Feder 51161948137 BMW
SUSPANDER nicht oeffnen! Hoher Druck! = suspander, do not open, high pressure
90518 Altdorf Germany
51.16-1 948 137
Typ 16-1 016 01505H 400N 40/04
the other one
Daempfer 51161954684 original BMW
Bezeichnung auf dem Teil
SUSRON SUSPA COMPART AG
90518-Altdorf Germany
5116 1954684 10/08 011 00288E
I assume if you contact a company specialized on gas springs, they can supply something. just a quick google search found this company http://www.indgassprings.com/
USA - Chicago
Industrial Gas Springs, Inc.
162 S. Pinnacle Dr.
Romeoville, IL 60446
Phone: 800.214.7034
Maybe they need a sample or the info what I posted above is enough for them.
SUSPA USA? Maybe that is the one which originally make them? http://www.suspa.com/us/products/gas-springs/
Shogun tricks and tips for the E32 series are HERE!
Great info, thanks Shogun! (you must get tired of hearing that lol)
I'm going to have to triple check both of these and make sure a junk car can't supply one or two. Man, you'd think as valuable as these things are, they'd at least last a while!
B
Brian A Silverton, OR
'85 Euro 635CSi 5 speed conversion
'87 L7
'93 Euro M5 3.8
'93 740i
'94 850CSi #31
'95 540i Msport 6 speed
'96 M3/4/6 Euro 3.2l
'03 M3 Cab
'12 X5 3.5D Tuned
Unofficial 1995 BMW 540i MSport registrar (please see Facebook BMW 1995 BMW540i Msport registry group to join or report a sale)
Also check the boat outfitters, when my wife had her small Nissan I bought boat gas shocks with stainless brackets for the tailgate door, modified them a bit to fit, that was about 1/3 of the Nissan shocks, these pleasure boat outfitters have all the sizes, even stainless steel shocks etc
examples here
http://www.boatoutfitters.com/marine...as-shocks.html
http://www.go2marine.com/category/14...for-boats.html
..special order gas springs to fit your application contact...... http://www.attwoodmarine.com/store/category/gas-springs
Shogun tricks and tips for the E32 series are HERE!
on the German forum they found alternatives https://www.7-forum.com/forum/showthread.html?t=244263
https://www.sodemann-federn.de/be-6-40-400-t
Shogun tricks and tips for the E32 series are HERE!
as per ETK yours should also have 2 http://bmwfans.info/parts-catalog/E3...m/glove_box_2/ probably you cannot see both, you first have to remove the cover inside
#4 Absorber 51161954684 25N
#5 Gas pressurized spring 51161948137 https://www.bmwpartsdeal.com/parts/b...161948137.html
Last edited by shogun; 03-18-2023 at 06:30 PM.
Shogun tricks and tips for the E32 series are HERE!
So is the idea to purchase these two?
https://www.sodemann-federn.de/be-6-40-400-t
https://www.bmwpartsdeal.com/parts/b...161948137.html
then your glovebox is golden?
#5 Gas shock BMW 51161948137 is 400N and that is the Sodeman BE-6-40-400-T https://www.sodemann-federn.de/be-6-40-400-t, they also have a US website and that says Force (lbs) 89.92 https://www.sodemann-springs.us/be-6-40-400-t
maybe you find the other one with 25N = Absorber 51161954684 25N in the aftermarket in the US cheaper ones as BMW price is crazy with MSRP: $225.44, check what is available, maybe even Sodeman have it https://www.sodemann-springs.us/ ,measure yours to make sure to find the correct length, also check what is written on your shocks. Johan has a good write up:
Glove Box Shock Absorber Replacement
Problem: When I opened my glove box it just fell open and dangled forward. Time to replace those gas shocks !
There are two in the dash. One is an absorber to make the dash open gently downwards. The other one is a gas shock holding the compartment in the back or all the way forward in the direction of the driver.
Fixing it: If you're just replacing the absorber you can do this with the compartment in your car. For the shock you have to remove the entire box.
The absorber just clips off and the new one just clips on.
When you're replacing the shock you have to take out the compartment.
To remove the glove box:
Remove the black plastic cover on the hinge (right rear side).
Remove the torch charger socket and loosen the wires.
The front part is held by the absorber and a strap. Unclip these.
To loosen the rear part you have to open the plastic clips in the rear
Then you're already to replace the box !
Removing the gas shock is quite easy since it probably lost most of the pressure. You can just pry it off with a screwdriver. To replace the shock I first fitted the top, then using a screwdriver I levered the bottom into place using the nut on the support bar.
Parts: These prices are for Europe when the article was written many years ago. Prices are in Euro excl. VAT or any other taxes.
BMW part nr description prices once upon the time
51161954684 Absorber 12.70
51161948137 Gas shock 16.90
When someone finds something fitting in the aftermarket, please post the details and links, many have the same problem.
https://www.bimmerforums.com/forum/s...ve-box-removal
http://bmwe32.masscom.net/johan/glov...box_shock.html
Glove boxes and lower dash: http://bmwe32.masscom.net/johan/dash...al_v1.1-1.html
Last edited by shogun; 03-23-2023 at 07:42 PM.
Shogun tricks and tips for the E32 series are HERE!
Found in my parts box a new old stock damper/absorber 51161954684 25N and measured it for those which look for an aftermarket damper
length of the cartridge 9.30cm
diameter of the cartridge 1.52cm
length of cartridge with brackets 13.25cm
length of damper expanded , end to end of bracket, 19.5cm
brackets hole innner diameter 0.6cm = 6mm
Written on the cartridge: BMW logo, SUSSRON, SUSPA COMPART AG, zip code 90518 Altdorf, Germany, 5116 1954684 10/08 01 00288E
Fits: E32, E34, E52 Z8 , pics https://www.ecstuning.com/b-genuine-...h/51161954684/ https://www.drive2.ru/l/577164990574757690/
with these details you should be able to find a replacement
Last edited by shogun; 03-25-2023 at 09:45 PM.
Shogun tricks and tips for the E32 series are HERE!
Bookmarks