Technique Tuning Stage 1 Turbo Kit BMW OBD2 E36 M3 96-99
Looking to sell my Technique Tuning Stage 1 turbo kit for an OBD 2 BMW E36 M3 96-99. It's pretty much the way Technique Tuning sells it but with a few upgrades/changes. The kit comes with a TT turbo manifold, Tial 38 mm wastegate, 3" downpipe, dump tube for wastegate to tie into exhaust, forge blow off valve, TT tuned ecu with bigger injectors and blow through mass air flow sensor, TT intake tube, TT charge pipe with silicon couplers/clamps, oil feed line, water cooling lines and tees.
The upgraded/changed parts from the original TT kit include a larger 12x24 CX Racing inter cooler with custom made mount, a custom fabricated cool side inter cooler pipe (that runs outside of the frame rail instead of beside the accessories belt), and a custom made intake tube with Spectre filter that sits in front of the turbo below the car with custom made heat shields.
Not included in the kit is an oil return line and oil pan tap. This is very inexpensive and easy to get.
Now the bad. The original Garrett T3/T4 60-1 Hybrid Turbocharger needs to be rebuilt or replaced. It began leaking oil into the inter cooler piping so I pulled it off and had it checked out. The professional turbo shop estimated it would cost around $400 to rebuild or a new one could be bought for around $750. The hot side inter cooler pipe runs under the frame rail so has some pretty large scrapes in the paint.
I'm looking to get $2600 obo + shipping for the entire kit, taking into consideration the cost for the turbo rebuild/replacement. The kit new is $6,800 and can be seen at http://www.techniquetuning.com/e36m3obd2turbo.html.
Call or text me with interests or any questions (717) 577-575two. I will not accept Panjo payment. Cash or paypal only.
List Date: 3/19/2017
For more info, click here to view the original listing: Technique Tuning Stage 1 Turbo Kit BMW OBD2 E36 M3 96-99
--------------------------------------
This item is no longer available.
--------------------------------------
did you ever have it dynod?
Sent from my 831C using Tapatalk
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
Unrelated but is that an oil temp gauge in the drain plug hole? I like that idea
97 Turbo 3.2L M3 - Cutring / ARP - RSI Top Mount - Gt4088r - ID1300 - Tial WG - 22RPD Tuned - 93 Octane - 3.5" Stainless
Nobody's interested at this price?
Last edited by WickkedM3; 04-18-2017 at 06:36 PM.
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
Make me a reasonable offer!
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
What do I need to run it on OBD1?
I think you would just need to get a tune for OBD1. Everything else should bolt up the same. I'd contact Technique Tuning to make sure though.
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
So tempting! To bad I'm in Canada. Hmmmm
Sent from my iPhone using Tapatalk
()()===[][]===()()
Still have the kit?
What state?
Yes, I still have it. I'm in Pennsylvania.
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
still for sale?
99' Titanium Silver/Black E36 ///M3 Coupe
Yes, still have it.
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
Sold! Sold! Sold!
96 Luxury M3- TT Stage 1 Turbo, M50 manifold, Custom 3" SS exhaust, AA diff. brace, BC coilovers, Eibach sway bars & strut bar, cross drilled rotors, Hawk pads, ss lines, 17" RH ZW1's
Bookmarks