I'm anxious to find out, my boost controller didn't work so I've just got to use a spring pressure so I won't be able to lower it to experiment. The 257 is rated at 630 HP and flows 62lb so honestly there's no reason mathematically it shouldn't be able to make 520whp.
All this PSI talk is making me extremely anxious... Spent all weekend in the garage. Probably around 15 hours total, I'm beat.. I'd be lying if I didnt say this project is starting to take a toll on me physically and mentally... Took me a good 5 or so hours to tighten the bolts to the manifold (since the head was already on the car). If anyone is going with the SPA put it on before you install the head if possible and have 3 or more friends help. It was total pita.
Intercooler mocked up; Either going to have it welded to the bumper brackets or bend steel to bolt it to the bumper bracket bolts. Thanks to Butters for the IC recommendation. Its solid as hell
Last edited by 328iFun; 04-17-2017 at 09:07 PM.
Badass, can't wait to see another boosted e36
Last edited by 328iFun; 04-18-2017 at 08:47 PM.
Put your scavenge here. Best place.
ForumRunner_20170418_195708.jpg
Where did you get the intercooler kit from? 2.5'' piping?
2.5" from Turbo
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
3" to intake manifold
http://www.ebay.com/itm/351193523274...%3AMEBIDX%3AIT
2.5" to 3" silicone elbow - This is only if your IC has 3" inlet.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Reciprocating saw with these https://www.zoro.com/dewalt-reciproc...VbkaAuaO8P8HAQ works great for cutting.
You really don't need all of the bends though, I have a ton of extra piping that I'll probably never use.
Last edited by 328iFun; 04-19-2017 at 06:36 AM.
That could be an option.
What are good options for atmospheric blow off valves?
EBay is your friend I went with the seller named wyntom his bov works great for 40$
https://www.racepartsolutions.com/it...?category=9281
this is what I have. No leaks at 35 psi when I leak tested. You can buy ones on ebay that look identical for $40
How does it sound?
I had wishful thinking when I order this: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Definitely is too big. Almost got it to fit though.
Last edited by 328iFun; 04-20-2017 at 05:14 AM.
Go to your air hose and disconnect the main line off the compressor and it sounds just like that.
So I got the car running as it should be. Idling fine. Waiting for funds to buy a injectors/maf/tune at this point. Clutch engages great, no water in coolant/ vice versa. Turbo sounds absolutely addicting.
I've read mixed reviews on RKtunes anyone here dealt with him? I would like for the tuning process to go as smoothly as possible.
Last edited by 328iFun; 04-21-2017 at 06:44 PM.
Buy rajis trm tune, that's what I use and you wouldn't know it's turboed unless I throttle it that's how good it runs.
Bookmarks