Yup I could do the whole turbo deal even cheaper the second time cause I wouldn't by so many things two and three times trying to figure out what works and what doesnt..
Last edited by 328iFun; 05-31-2017 at 05:30 AM.
Will be taking charge pipe to be welded.
Which pipe should I use? Are the bov and maf flange too close together in the first one, or would I be okay?
Sent from my SAMSUNG-SM-G935A using Tapatalk
Talking about the flanges? The one with them closer fits better to the ic
Sent from my SAMSUNG-SM-G935A using Tapatalk
The top one would be better, a few inches of straight section before the maf is good. Also bov to close to maf can cause idle issues depending on the bov used.
-sold...replaced by turbo e36
Def top one
How about this
Sent from my SAMSUNG-SM-G935A using Tapatalk
Think this one might be it. Was worried about the hood closing considering the size of big in the last pic:
Sent from my SAMSUNG-SM-G935A using Tapatalk
Bov*
Sent from my SAMSUNG-SM-G935A using Tapatalk
Looks fine that pipe enters the boot at a weird angle and might blow off at high boost but for now I guess it'll work.
This is mine. My bov is on the underside and a few inches down from the 90° bend.
ForumRunner_20170531_172256.jpg
Put the bov as far away as you can from the MAF. Or you will have issues like stalling when lifting off throttle. If its too close it will cause the MAF to go to 0v and shut your fuel down as it gets stuck in the eye of a tornado.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
You can see my bov in this pic. Works excellently.
Also ignore the pic of the lambo didn't mean to ad that lol...
ForumRunner_20170531_172609.png
Lol I feel like we could do this all evening
Sent from my SAMSUNG-SM-G935A using Tapatalk
That's true didn't think about that.
Sent from my SAMSUNG-SM-G935A using Tapatalk
I put mine on before the intercooler
Sent from my iPhone using Tapatalk
Remember the purpose of the bov, its to protect the turbo from stalling/compressor surge. So like Crazy showed, that's acceptable as well.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
It just needs to be between the compressor outlet and TB. Only issue with crazy's location is ease of access. I'd rather have mine accessible from above but it doesn't really matters.
Mine has easy accesss I can turn the wheel and get to it if I don't want to jack up the car
Sent from my iPhone using Tapatalk
Excuse my ignorance but what is the contraption to the right of your intake manifold. I think I may want one...
- - - Updated - - -
Thanks for all the input guys,
will probably go with the last pic I sent. Front bumper is easy enough to remove if I need to mess with it. By the time I get the car officially on the road anyway I would hope that I wouldn't need to play around with it too much anyway. Still have a ton of bodywork I need to do
Bookmarks