Results 1 to 10 of 10

Thread: I need a 1991 E32 750iL Wire Harness! Does anybody have one?

  1. #1
    Join Date
    Nov 2014
    Location
    Galveston, Texas, US
    Posts
    10
    My Cars
    1991 BMW 750iL

    Cool I need a 1991 E32 750iL Wire Harness! Does anybody have one?

    Hello everyone I have a 1991 BMW 750iL M50 V12 engine manufactured in Sept 1990. I need an engine wiring harness to make it run perfect. If anyone has an affordable one please call or text me at (409) 724-9109.
    Dallas

  2. #2
    Join Date
    Jan 2005
    Location
    Japan
    Posts
    54,654
    My Cars
    11/88 E32 750iL+98 E36M3
    I assume you mean M70, not M50. What DME do you have? Bosch end number 156 or 352?
    750iL E32 M70/B50 91--> 0 261 200 352 Bosch Motronic M1.7
    750iL E32 M70/B50 88-90 0 261 200 156 Bosch Motronic M1.2

    Which wire harness? The complete engine wire harness or just the ignition wires? Ignition wires for the M70 I have new on stock http://www.bimmerforums.com/forum/sh...and-M73-engine
    In case you want a complete engine wire harness, what do you need? Including the DMEs, EML, the diagnosis port, X20, X21 port, wire looms to the MAF's and to throttling valves? And so on.
    Details please.
    Also check the DMEs you have, mfg date 09/1990 is just at the border line between M1.2 and M1.7, and these engine wire looms are completely different and are not interchangeable, for example the DME 352 has 30 pins more = much more cables inside the engine bay.
    Shogun tricks and tips for the E32 series are HERE!

  3. #3
    Join Date
    Nov 2014
    Location
    Galveston, Texas, US
    Posts
    10
    My Cars
    1991 BMW 750iL
    Correct, I meant M70. I'll check on the DME in the owners manual or can you determine from the vin number?

  4. #4
    Join Date
    Jan 2005
    Location
    Japan
    Posts
    54,654
    My Cars
    11/88 E32 750iL+98 E36M3
    Better check on the DME's inside the e-box right side engine bay, have seem cars where the M70 engine has been changed and different DMEs were installed with the wire loom.
    And then tell us what you need in detail.
    Shogun tricks and tips for the E32 series are HERE!

  5. #5
    Join Date
    Dec 2005
    Location
    Baltimore, MD
    Posts
    365
    My Cars
    81 Scirocco-92 750il
    I have a 91 and a 90 m70 parts car(s). DC79246 and I forget the other ones vin but they might work for what you need. I would not mind parting with the harnesses out of either one but you would need to show up here in MD to pull them out. (otherwise you are paying me more for my time then you are for the harness) I also don't care how hacked up the cars get, so long as I can still use them as storage sheds. Brian---three o one two 4 7 nine three 5 3.

  6. #6
    Join Date
    Nov 2014
    Location
    Galveston, Texas, US
    Posts
    10
    My Cars
    1991 BMW 750iL
    Sorry it took me so long to confab with you I've been having child custody issues.
    Anyway my vin # is Wbagc8313MDC78785
    I need the engine wire Harness that looks like this
    Attachment 601865
    Attached Images Attached Images
    Last edited by shogun; 06-06-2017 at 04:08 AM. Reason: double post with pics corrected

  7. #7
    Join Date
    Jan 2005
    Location
    Japan
    Posts
    54,654
    My Cars
    11/88 E32 750iL+98 E36M3
    As for the engine harness contact vwleadfoot, for the ignition wire set for the M70 I already replied your PM, have them on stock new, several sets.
    Update, VIN details


    Vehicle information



    VIN WBAGC8313MDC78785
    Type code GC83
    Type 750IL (USA)
    E series E32 (2)
    Series 7
    Type LIM
    Steering LL
    Doors 4
    Engine M70
    Displacement 5.00
    Power 220
    Drive HECK
    Transmission AUT
    Colour GRANITSILBER METALLIC (237)
    Upholstery (0436)
    Prod.date 1990-09-14

    Vehicle options
    S214 Automatic stability control (ASC+T)
    S240 Leather steering wheel
    S245 Steering wheel column adjustment,electr.
    S288 BMW light alloy wheel, cross spoke 29
    S436 Prep. infin. variab. dip in rearv.mirror
    S488 Lumbar support, driver and passenger
    S494 Seat heating driver/passenger
    S496 Seat heating, rear
    S640 Preparation f tel.installation universal
    S694 Provisions for BMW 6 CD changer

    09/1990 production date means 1991 production year model.

    750iL E32 M70/B50 88-90 0 261 200 156 Bosch Motronic M1.2
    750iL E32 M70/B50 91--> 0 261 200 352 Bosch Motronic M1.7
    Last edited by shogun; 06-06-2017 at 04:17 AM.
    Shogun tricks and tips for the E32 series are HERE!

  8. #8
    Join Date
    Nov 2014
    Location
    Galveston, Texas, US
    Posts
    10
    My Cars
    1991 BMW 750iL
    M70 wire Harness.jpgTHIS IS THE HARNESS THAT I NEED for my 1991 750iL. M70 vin #WBAGC83113MDC78785 mY EMAIL IS jeepjohnson35@gmail.com

  9. #9
    Join Date
    Nov 2014
    Location
    Galveston, Texas, US
    Posts
    10
    My Cars
    1991 BMW 750iL

    NEED injector wire harness for 1991 750iL

    M70 wire Harness.jpgPlease see picture!!! This is exactly what I NEED! for 1 1991 manufactured SEPT 1990 or later.
    IF YOU HAVE IT PLEASE CONTACT ME.

  10. #10
    Join Date
    Jan 2005
    Location
    Japan
    Posts
    54,654
    My Cars
    11/88 E32 750iL+98 E36M3
    Call Kalevera, a member here on the forum, I found in his list of parts cars a 750iL from 1989 and on page 12 is a 1991 E32 750iL http://www.bimmerpc.com/index.html
    Shogun tricks and tips for the E32 series are HERE!

Similar Threads

  1. need info on ignition coil wire harness
    By red97tj in forum 1991 - 1999 (E36)
    Replies: 6
    Last Post: 10-22-2007, 11:31 AM
  2. Need a vanos M50 ecu/wiring harness
    By permit in forum BMW Parts Wanted
    Replies: 2
    Last Post: 07-06-2005, 12:13 AM
  3. Need to buy Blaupunkt RPD545 wiring harness
    By nookatee in forum BMW Parts Wanted
    Replies: 0
    Last Post: 04-21-2005, 08:44 PM
  4. Please help: need part # for BMW alarm wiring harness
    By blaughva in forum 1991 - 1999 (E36)
    Replies: 2
    Last Post: 07-09-2004, 02:38 AM
  5. Will i need to replace my current wiring harness?
    By The451Kid in forum Car Audio & Electronics sponsored by Bavsound
    Replies: 0
    Last Post: 03-04-2004, 10:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •