E 38 manual needs to pass emissions

[racer2086]

I need to rewire the starter circuit so it doesn't have soft start so the key switch has power only in the cranking position


Sent from my iPhone using Tapatalk

Oh man, I don't know how to do that... Did you look at WDS (the wiring diagrams)?

[Ben.urban90]

Oh man, I don't know how to do that... Did you look at WDS (the wiring diagrams)?

No as I am unable to access any of that on my iPhone or MacBook unfortunately .. if someone could produce pictures I could pull it off as I just did the guides with ipe blocks and a metric bolt that was tapered for a crank lock


Sent from my iPhone using Tapatalk

[007008]

Of course this is 99+
This is Craigs thread about pre-face
https://www.bimmerforums.com/forum/s...d-Factoids-FAQ

[Ben.urban90]

Of course this is 99+
This is Craigs thread about pre-face
https://www.bimmerforums.com/forum/s...d-Factoids-FAQ

Thanks very much


Sent from my iPhone using Tapatalk

[Ben.urban90]

I can convert the car back to English, but beyond that, I have no experience with a 6 speed swap if there is work to do beyond coding... what needs to be done?

When can you re code the e38


Sent from my iPhone using Tapatalk

[racer2086]

What do you need coded? I would like to make sure that I 1) can do it and 2) know exactly how to do it before we try, because coding on these cars can very quickly go from 15 minutes up to 2-3+ hours.

Life is really really busy right now... I have 2 months to finish my thesis and I'm travelling all of April on the weekends for interviews and moving. So if it's gonna happen it'll have to be here in March or some time at the end of May. I would be willing to do it one of these next two weekends. After that, it's anyone's guess.

Also, your battery has to be healthy and fully or nearly fully charged. I have a charger, but it's not a huge one. So it'll let me code for a decent amount on a healthy, charged battery, but if it is old, weak, and not well charged, it may not be able to keep up.

[Ben.urban90]

What do you need coded? I would like to make sure that I 1) can do it and 2) know exactly how to do it before we try, because coding on these cars can very quickly go from 15 minutes up to 2-3+ hours.

Life is really really busy right now... I have 2 months to finish my thesis and I'm travelling all of April on the weekends for interviews and moving. So if it's gonna happen it'll have to be here in March or some time at the end of May. I would be willing to do it one of these next two weekends. After that, it's anyone's guess.

Also, your battery has to be healthy and fully or nearly fully charged. I have a charger, but it's not a huge one. So it'll let me code for a decent amount on a healthy, charged battery, but if it is old, weak, and not well charged, it may not be able to keep up.

8603915612 shoot me a text . Thanks


Sent from my iPhone using Tapatalk

[mooll]

so you're not selling it? or are you just hoping some one will give u the asking price lol

[Ben.urban90]

so you're not selling it? or are you just hoping some one will give u the asking price lol

Everything is forsale no one has even come at with offers besides trading for a 2000 montecarlo and another was a trade for a Mazda 3 .. so I would rather look at my BMW sitting than drive one of those pos rigs


Sent from my iPhone using Tapatalk

[racer2086]

just texted you