I have a 95 325is m50 engine worked out with bigger light weight pistons, double valve springs with titanium retainers, aluminum flywheel with m3 clutch, headers, and i am putting a set of shrick cams and a chip,
Do you guys think that putting the M3 24Lb injectors will be fine ??
P.S : The only reazon I dint build an M3 engine is cuz i had 2 m50 engines
Last edited by e36ispower; 02-10-2017 at 08:37 AM.
Just make sure the tune is adjusted for that injector size, thats all.
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
That's what i figured, Thanks
I would use an S52 or M54 3.0L crank, not just bore for bigger pistons. Go for 3.0 or 3.2L. 24 lb injectors are probably fine but if you are buying a tune it probably specifies the injectors and hfm to use. 24 should be fine.
Bookmarks