bumping this from the dead.....just noticed this on my car today, any chance you solved it??
i suggest sticking with your thread as it'll be easier to consolidate information and point everyone to one spot rather than spreading it out across multiple threads - especially on a 4 year old thread that might not be relevant as this thread was never resolved.
for those looking to help - majormotorhead's thread is here: https://www.bimmerforums.com/forum/s...se-in-5th-gear
'95 325iS - auto to manual swap done!
Having the same issue here 😂. I replaced my clutch a while back never had the noise. As soon as I put a new shifter and solid trans mounts I start getting the noise. I will try and put the old mounts back in and see if it makes any difference! Will update as soon as I get it done.
Might want to check whether you put the shift rod in from the wrong direction or backwards. It might be hitting the guibo. (flex disc).
Solid trans mounts? Mind if I ask why? Full race car? This isn't a convertible is it?
Chris Powell
Racer and Instructor since, well. decades, ok?
Master Auto Tech, owner of German Motors of Aberdeen
BMWCCA 274412
German Motors is hiring ! https://www.bimmerforums.com/forum/s...1#post30831471
Bookmarks